Wheel cover set "Retro" - 16 inch - for Fiat Ducato (from 2018) single tyre (Version 2)

Exclusively and only at HANSEN, a new edition of a classic: Stainless steel hub caps for transporter and mobile homes. We're offering something new and classic. Our new developed hub caps in an Oldstyle design. This kind of hub caps was very popular during the 70s but has been later replaced by the hub caps with a round-hole-design as it is used today. We've refined these caps now and brought them to our times. We present this classic with our well-proven fastening system in OEM quality.Have you ever aked yourself: Steel or aluminum rims?Aluminum rims are lighter than steel rims? At least that is the claim. Very often you’ll only gain a few kilograms. The essential disadvantages are often overlooked: aluminum rims are mostly very expensive and resent any kind of damages. Usal wheel covers display also no satisfactory alternative. They embrittlement very fast and appear to be grotty and cheap. The fitting is also mostly very bad.We’ve the perfect alternative for you!Highly polished hub caps made of stainless steel for transporter and mobile homes. The wheel trims are screwed on with vehicle-specific brackets (no clamp bracket), e.g. on the ventilation holes of the standard steel rim.Scope of delivery:4x Wheel Caps "Retro" 16 inch (dished) (Item no. 2171)4x Mounting bracket (Item no. 5460)Compatible with Fiat Ducato (1993 to 2017) single tyreType:230244250 2.0 Maxi, 2.3 Maxi, 3.0 Maxi290 2.3 Maxi, 3.0 MaxiNote:Fits only 16 inch steel rims with 10 ventilation holes (Hole diameter: 35mm)For 40 years we have been offering motorbike, truck and off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition if the standard or accessory wheel lacks the final visual kick. With the right Hofmann wheel spacers, your vehicle gets an even sportier look because the wheels and tires really fill out the wheel arches this way. The exact adjustment of the track width not only improves the appearance of your vehicle, but also optimizes the handling and the rolling tendency. Please note the respective requirements for the rim and tire combinations.Please understand that we only take back new and unassembled goods.Vehicle data :Trade name : Fiat DucatoVehicle type : 230, 230L, 230D, 244, 244D, 244LEEC-BE-No. : G687, G688, G830, K916, K917, K918, e3*98/14*0102*..Not permitted for vehicles with an axle load of over 2550kgSuitable for the following tire sizes on Fiat Ducato (230-244) :Rim 6x16 with tires 205/75R16Rim 6x16 with tire 215/75R16Vehicle data :Trade name : Fiat DucatoVehicle type : 280, 290EEC-BE-No. : C642, C642/1, C642/2, C642/3Not allowed for vehicles with an axle load of more than 2000kgSuitable for the following tire sizes on Fiat Ducato (280-290) :Rim 5,5x16 with tire 195/75R16Vehicle data :Trade name : Citroen JumperVehicle type : 230, 230L, 230D, 244, 244D, 244LEEC-BE-No. : G712, G713, G831, K907, K908, K909Not permitted for vehicles with an axle load of over 2550kgSuitable for the following tire sizes on Citroen Jumper :Rim 6x16 with tire 205/75R16Wheel 6x16 with tire 215/75R16Vehicle data :Trade name : Peugeot BoxerVehicle type : 230, 230L, 230D, 244, 244D, 244LEEC-BE-No. : G716, G717, G828, K912, K913, K914Not permitted for vehicles with an axle load of over 2550kgSuitable for the following tire sizes on Peugeot Boxer :Rim 6x16 with tire 205/75R16Wheel 6x16 with tire 215/75R16Specifications for wheel spacers :Disc : 30mm thick (widening 60mm per axle)Surface : steel disc galvanized (material ST-52-3)Bolt circle : 5x130mmOuter diameter : 175mmCentering collar : 78,1mmWe have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be happy to help you.

Robust, black powder coated rear footboard, made of construction steel. The slip resisdent surface will make it easier to load or unload gravity objects. The footboard gives you a secure footing with a total length of 152 cm and a depth of the footboard of 17 cm. Mounting is done to already existing mounting points, drilling is not necessary!TÜV parts certificate:Our footboards are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: Fiat (I)Trade name: Ducato Vehicle type: 250, 250 L, 250 BWith EC-BE-No.: e3*2007/46*0031.., e3*2007/46*0044.., e3*2007/46*0049*.., e3*2001/116*0232*.., L779, L967For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

7" LED lightbar/headlamp with 40 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc.Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

Unsere 4" Side Shooter LED Lightbar ist ein leistungsstarker Zusatzscheinwerfer mit ECE R149 Zulassung als Fernscheinwerfer. Durch seine kompakte Bauweise ist der kleine LED Würfel vielseitig einsetzbar.Somit sorgt der Scheinwerfer für mehr Sicherheit auf dunklen, unbeleuchteten Straßen. Auch abseits der Straße im rauen Gelände können unsere Lightbars in Kombination mit unseren Frontbügeln, Überrollbügeln etc. vielseitig eingesetzt werden. Durch den Multivoltanschluss von 9-32 Volt bietet der Scheinwerfer einen weiten Fahrzeugverwendungsbereich für z.B. Off-Road Fahrzeuge, Jeep´s, Pickup´s, US-Cars, LKW´s, SUV´s, AT´s, Traktoren, Bagger, Boote, Motorräder etc. Das druckdichte Alugussgehäuse sorgt für Schutz gegen Wasser, Staub und Schmutz.Durch die jeweils seitlichen 3 LED´s, kann der Side Shooter das Licht bis zu einem Abstrahlwinkel von 180° verteilen.Bitte beachten Sie, dass nur Lightbars/Scheinwerfer die der europäischen ECE-Norm entsprechen im Straßenverkehr zugelassen sind. Alle anderen Scheinwerfer ohne ECE-Kennzeichnung sind nur als Arbeitsscheinwerfer zugelassen und dürfen im Straßenverkehr nicht verwendet werden. Unsere Scheinwerfer haben alle nötigen Prüfzeichen gemäß STVZO und sind 100% eintragungsfrei.Straßenzulassung/Rechtlich Hinweise:STVO Zulassung nahezu weltweit dank E-Prüfzeichen gemäß ECE-Regelung 149 als Fernscheinwerfer & Elektromagnetische Verträglichkeit zertifiziert nach ECE R10.Prüfzeichen: PL = Scheinwerfer mit KunststoffabdeckungPrüfzeichen: E9 = EU-Land, dass die Genehmigung erteilt hat. 9 = SpanienPrüfzeichen: R10 = FunkentstörungGemäß Zulassungsverordnung muss dieser Scheinwerfer paarweise verbaut werden

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Suitable for all lamp bars, front protection bars and roll bars with a tube diameter of 60mm to 76mm.The Rugged Ridge X-Clamp headlight clamp made of black aluminum is ideal for the additional attachment of headlights, beacons, etc. It uses the state-of-the-art Pivotal Fit technology and can be adjusted to the tube diameter by using the different screws included in the scope of delivery. Very stable design that enables extremely low-vibration installation of additional headlights.No other clamp on the market offers such a perfect fit for such a wide range of pipe diameters! The clamp has a 12mm hole, so you can easily attach the headlights or rotating beacons. If the clamp is fastened upside down, it can even be mounted on e.g. bull bars that are placed very close to the body.The headlights shown are not included!For 40 years we have been offering off-road accessories with service and headquarters in Germany. Ask us to learn more about our items. We're here to help.