Fanfares/Horns

For all air horns offered. The valve works via an electrical impulse and is operated e.g. via the horn button. Only for operation with 24 volts!For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

For all air horns offered. The valve works via an electrical impulse and is operated e.g. via the horn button. Only for operation with 12 volts!For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The pull valve is suitable for all offered air horns, which are mounted on the roof.  The compressed air inlet measures 10 mm and is located on the lower side of the horn.This applies to all air horns produced in Europe - e.g. Bosch, Marco etc. horns. The pull valve is supplied with a banjo bolt. On one side the banjo bolt is screwed into the pull valve and on the other side into the horn from below (10 mm thread). At the same time, the banjo bolt is used for screwing to the roof.  If necessary, the length of the banjo bolt must be adjusted.The compressed air connection is made with a 6 mm hose to the existing brake air line, e.g. display in the dashboard. Operation of the valve by the supplied cable.We also offer a complete hose set with 6 mm compressed air line, a T-piece to connect the line and the complete fittings. (You can find this set in our online store).For air horns from China (generally Far East) there are different connections for which we do not offer valves.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

For all those who find a compressed air horn with a "normal" compressor too quiet, we offer here the ultimate sound machine for boats. The air pressure provides the "right sound". The piston compressor keeps the pressure in the air tank permanently at 6 -7 bar. If the pressure drops below 5 bar, the compressor is switched on by the integrated pressure switch and the boiler pressure is rebuilt. The pressure of 6 - 7 bar is led from the air tank, by means of high pressure hose to the double horn. At the air horn is a solenoid valve in 12 volts, which opens as soon as the impulse / current is given with the separate horn button or on / off switch (does not belong to the scope of supply). The unit is delivered complete with a compressed air horn.Technical data / dimensionsCompressor:13 x 8 cm12 Volt, 15 A, low maintenance and powerfulAir tank:25 x 15cm2 liters capacityHorn:Length 30 / 23 cmhigh gloss chrome plated funnelPressure:6 to 7 barTube:2m plastic hose 1/4" ODActuation:Electrovalve / horn buttonVolume:125 db ! - Manufacturer specification420 / 380 Hz.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

2-piece set, 12 volt, electric horns, suitable for boats. The horns lean in design and style to the horns used in the past. With us you get two different holders, which you can use, depending on your needs. Quick and easy connection to plus and minus cable without air hose and compressor. Simply connect and ready. Immediate attention is guaranteed.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Stainless steel polished funnel with plastic holder. Loud powerful horn with 117db (A) (2m). These horns are designed for a truck compressed air system with a bar number of 6-12. They are delivered with mounting material.Made in Europe (Italy) - no cheap import from the Far East !IMPORTANT!This horn has an E-mark and is therefore, compared to most horns from the Far East, also approved in Europe in road traffic!Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as an additional signaling device, they do not have to be approved or registered. They must be installed in such a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

Stainless steel polished funnel with plastic holder. Loud powerful horn with 117db (A) (2m). These horns are designed for a truck compressed air system with a bar number of 6-12. They are delivered with mounting material.Made in Europe (Italy) - no cheap import from the Far East !IMPORTANT!This horn has an E-mark and is therefore, compared to most horns from the Far East, also approved in Europe in road traffic!Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as an additional signaling device, they do not have to be approved or registered. They must be installed in such a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles must have at least one audible warning device, the sound of which alerts vulnerable road users to the approach of a motor vehicle without frightening them or causing more than an unavoidable nuisance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

Stainless steel polished funnel with plastic holder. Loud powerful horn with 118db (A) (2m). These horns are designed for a truck compressed air system with a bar number of 6-12. The delivery includes mounting material.Made in Europe (Italy) - no cheap import from the Far East !IMPORTANT!This horn has an E-mark and is therefore, compared to most horns from the Far East, also approved in Europe in road traffic!Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as an additional signaling device, they do not have to be approved or registered. They must be installed in such a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

Stainless steel polished funnel with plastic holder. Loud powerful horn with 118db (A) (2m). These horns are designed for a truck compressed air system with a bar number of 6-12. The delivery includes mounting material.Made in Europe (Italy) - no cheap import from the Far East !IMPORTANT!This horn has an E-mark and is therefore, compared to most horns from the Far East, also approved in Europe in road traffic!Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as an additional signaling device, they do not have to be approved or registered. They must be installed in such a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

High quality brass chrome plated funnel. Loud, powerful horn with 116db (A) (2m). These horns are designed for a truck compressed air system with a bar number of 6-12. They are delivered with mounting material.Made in Europe (Italy) - no cheap import from the Far East !IMPORTANT!This horn has an E-mark and is therefore, compared to most horns from the Far East, also approved in Europe in road traffic!Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as an additional signaling device, they do not have to be approved or registered. They must be installed in such a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

Stainless steel polished funnel with plastic holder. Loud powerful horn with 118db (A) (2m). These horns are designed for a truck compressed air system with a bar number of 6-12. The delivery includes mounting material.Made in Europe (Italy) - no cheap import from the Far East !IMPORTANT!This horn has an E-mark and is therefore, compared to most horns from the Far East, also approved in Europe in road traffic!Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as an additional signaling device, they do not have to be approved or registered. They must be installed in such a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.