7" LED spotlight Night Raptor 12-24 Volt with parking light

Protect your headlights from dirt and damageOur cover cap for the 7" Night Raptor LED spotlight is an indispensable accessory to protect the spotlight from dirt, dust and damage. The cover cap is made of high-quality material and fits perfectly on your LED spotlight. It is easy to install and provides excellent protection for your headlights.We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

Suitable for all lamp bars, front protection bars and roll bars with a tube diameter of 60mm to 76mm.The Rugged Ridge X-Clamp headlight clamp made of black aluminum is ideal for the additional attachment of headlights, beacons, etc. It uses the state-of-the-art Pivotal Fit technology and can be adjusted to the tube diameter by using the different screws included in the scope of delivery. Very stable design that enables extremely low-vibration installation of additional headlights.No other clamp on the market offers such a perfect fit for such a wide range of pipe diameters! The clamp has a 12mm hole, so you can easily attach the headlights or rotating beacons. If the clamp is fastened upside down, it can even be mounted on e.g. bull bars that are placed very close to the body.The headlights shown are not included!For 40 years we have been offering off-road accessories with service and headquarters in Germany. Ask us to learn more about our items. We're here to help.

Alu-Schelle passend für alle Lampenbügel, Frontschutzbügel und Überrollbügel mit einem Rohrdurchmesser von 63mm bzw. 63,5mm. Ideal für die zusätzliche Befestigung von Scheinwerfern, Rundumleuchten etc... Sehr stabile Ausführung mit 50mm Breite und 105mm Gesamtlänge. Die Schelle hat eine Bohrung von 10mm, so können Sie die Scheinwerfer oder Rundumleuchten leicht befestigen. Zusammengehalten werden die beiden Teile der Halterung mit einer Innensechskantschlüssel. Der Gesamtdurchmesser der Schelle beträgt 65mm. Mit der im Lieferumfang enthaltenen biegsamen Kunststoffeinlage wird ein Durchmesser von 63,5mm erreicht. Die Montage der Schellen kann so erfolgen, dass die Leuchten leicht vor oder hinter dem Bügel stehen.Seit 40 Jahren bieten wir Off Road-Zubehör mit Service und Firmensitz in Deutschland an. Fragen Sie uns, um mehr zu unseren Artikeln zu erfahren. Wir helfen Ihnen gerne weiter.

Die schwarze Alu-Scheinwerfer-Schelle ist passend für alle Lampenbügel, Frontschutzbügel und Überrollbügel mit einem Rohrdurchmesser von 75-78 mm.Diese ist ideal für die zusätzliche Befestigung von Scheinwerfern, Rundumleuchten etc. Die Ausführung ist sehr stabil mit einer Breite von 50 mm . Die Schelle hat eine Bohrung von 14 mm, so können Sie die Scheinwerfer oder Rundumleuchten leicht befestigen. Zusammengehalten werden die beiden Teile der Halterung mit einer Innensechskantschraube. Der Gesamtdurchmesser der Schelle beträgt 78 mm. Im Lieferumfang ist eine durchsichtige, biegsame Kunststoffeinlage enthalten. Durch diese Einlage erreicht die Scheinwerfer-Schelle einen Rohrdurchmesser von 75-78 mm und hat einen sehr festen Halt auf dem Bügel.Die Kunststoffeinlage hat den zusätzlichen Vorteil, dass das Rohr vor Kratzern geschützt ist. Die Einlage wird zwischen die Schelle und das Rohr gelegt und verhindert somit den direkten Kontakt zwischen Rohr und Schelle.Seit 40 Jahren bieten wir Off Road-Zubehör mit Service und Firmensitz in Deutschland an. Fragen Sie uns, um mehr zu unseren Artikeln zu erfahren. Wir helfen Ihnen gerne weiter.

Clamp suitable for all lamp bars, bull bars and roll bars with a tube diameter of 60mm. Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width and 105mm total length. The clamp has a hole of 10mm, so you can easily attach the headlights or rotating beacons. The two parts of the bracket are held together with a hexagon socket screw. The overall diameter of the clamp is 65mm. With the included flexible plastic insert, a diameter of 60.0mm is achieved. The clamp can be mounted so that the lights are slightly in front or behind the bracket.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Aluminum clamp suitable for our bull bars with oval tubes (Ø 89mm). Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width. The clamp has an oval hole of 20x8mm in both ends, so you can easily attach the headlights or rotating beacons.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Black clamp suitable for our bull bars with oval tubes (Ø 89mm). Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width. The clamp has an oval hole of 20x8mm in both ends, so you can easily attach the headlights or rotating beacons.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Unsere 4" Side Shooter LED Lightbar ist ein leistungsstarker Zusatzscheinwerfer mit ECE R149 Zulassung als Fernscheinwerfer. Durch seine kompakte Bauweise ist der kleine LED Würfel vielseitig einsetzbar.Somit sorgt der Scheinwerfer für mehr Sicherheit auf dunklen, unbeleuchteten Straßen. Auch abseits der Straße im rauen Gelände können unsere Lightbars in Kombination mit unseren Frontbügeln, Überrollbügeln etc. vielseitig eingesetzt werden. Durch den Multivoltanschluss von 9-32 Volt bietet der Scheinwerfer einen weiten Fahrzeugverwendungsbereich für z.B. Off-Road Fahrzeuge, Jeep´s, Pickup´s, US-Cars, LKW´s, SUV´s, AT´s, Traktoren, Bagger, Boote, Motorräder etc. Das druckdichte Alugussgehäuse sorgt für Schutz gegen Wasser, Staub und Schmutz.Durch die jeweils seitlichen 3 LED´s, kann der Side Shooter das Licht bis zu einem Abstrahlwinkel von 180° verteilen.Bitte beachten Sie, dass nur Lightbars/Scheinwerfer die der europäischen ECE-Norm entsprechen im Straßenverkehr zugelassen sind. Alle anderen Scheinwerfer ohne ECE-Kennzeichnung sind nur als Arbeitsscheinwerfer zugelassen und dürfen im Straßenverkehr nicht verwendet werden. Unsere Scheinwerfer haben alle nötigen Prüfzeichen gemäß STVZO und sind 100% eintragungsfrei.Straßenzulassung/Rechtlich Hinweise:STVO Zulassung nahezu weltweit dank E-Prüfzeichen gemäß ECE-Regelung 149 als Fernscheinwerfer & Elektromagnetische Verträglichkeit zertifiziert nach ECE R10.Prüfzeichen: PL = Scheinwerfer mit KunststoffabdeckungPrüfzeichen: E9 = EU-Land, dass die Genehmigung erteilt hat. 9 = SpanienPrüfzeichen: R10 = FunkentstörungGemäß Zulassungsverordnung muss dieser Scheinwerfer paarweise verbaut werden

4" LED lightbar/headlamp with 20 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Even off-road, in rough terrain, our Lightbars can be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

7" LED lightbar/headlamp with 40 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc.Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

20" LED lightbar/headlamp with 42 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

38" LED lightbar/headlamp with 84 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

12" LED light bar/headlamp with 20 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

20" LED lightbar/headlamp with 12 high-power LEDs á 7 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Newly developed driving lamp incl. LED parking light ring. Approved as a driving lamp with LED parking light ring. All required test marks are present on the lens. Rugged and durable stainless steel housing.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Newly developed LED spotlight incl. LED parking light ring. Due to the multi-voltage connection, this headlight can be used equally for cars, SUVs and trucks. Approved as a driving lamp incl. parking light ring. All required approval marks are present on the lens. Rugged and durable stainless steel housing.We have been offering off road accessories for 40 years with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.