Fiat Ducato

Have you ever aked yourself: Steel or aluminum rims?Aluminum rims are lighter than steel rims? At least that is the claim. Very often you’ll only gain a few kilograms. The essential disadvantages are often overlooked: aluminum rims are mostly very expensive and resent any kind of damages. Usal wheel covers display also no satisfactory alternative. They embrittlement very fast and appear to be grotty and cheap. The fitting is also mostly very bad.We’ve the perfect alternative for you!Highly polished hub caps made of stainless steel for transporter and mobile homes. The wheel trims are screwed on with vehicle-specific brackets (no clamp bracket), e.g. on the ventilation holes of the standard steel rim.Scope of delivery:4x Wheel Caps 16 inch (flat) (Item no. 2159)4x Mounting bracket (Item no. 5405) (Version 1)Compatible with Fiat Ducato (from 2018) single tyreModel: 290 2.3 Maxi, 3.0 MaxiNote:Two different rims are used on Fiat Ducato from year of manufacture 2018. However, they only differ in the shape and placement of the ventilation holes. Here you can find a picture of the rims.For 40 years we have been offering motorbike, truck and off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

For the connection of e.g. daytime running lights you need these resistors additionally. If the fog lights are omitted, an error message is shown in your on-board computer or display. By connecting these special resistors you can mount the daytime running lights error-free on your vehicle.Suitable for vehicles with Can-Bus system!The vehicles of the newer generation are nowadays equipped with so-called Can-Bus or LIN-Bus systems, which check the light, display and turn signal function by means of a low, permanent test current. So that the installation of our daytime running lights and the omission of the standard fog lights no error message is displayed, we offer these resistors for our daytime running lights.Scope of delivery:2 pcs. Resistors 100 Watt / 6 Ohmwith a waterproof 2-pin plug (H11), which is partly suitable for the fog light connections of the following manufacturers VW, Skoda, Seat, Audi, BMW, Opel, many Alfa Romeocable length: 0,5mWe have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

For the connection of e.g. daytime running lights you need these resistors additionally. If the fog lights are omitted, an error message is shown in your on-board computer or display. By connecting these special resistors you can mount the daytime running lights error-free on your vehicle.Suitable for vehicles with Can-Bus system!The vehicles of the newer generation are nowadays equipped with so-called Can-Bus or LIN-Bus systems, which check the light, display and turn signal function by means of a low, permanent test current. So that the installation of our daytime running lights and the omission of the standard fog lights no error message is displayed, we offer these resistors for our daytime running lights.Scope of delivery:2 pcs. Resistors 55 Watt / 6 Ohmwith a waterproof 2-pin plug (H11), which is partly suitable for the fog light connections of the following manufacturers VW, Skoda, Seat, Audi, BMW, Opel, many Alfa Romeocable length: 0,5mWe have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

For the connection of e.g. daytime running lights with fog lights you also need these resistors. Our headlights are connected only on one side with the standard fog light line, the right connection side is not needed, this results in an error message displayed in your on-board computer or display. By connecting these special resistors you can mount the daytime running lights error-free on your vehicle.Suitable for vehicles with Can-Bus system!The vehicles of the newer generation are nowadays equipped with so-called Can-Bus or LIN-Bus systems, which check the light, display and turn signal function by means of a low, permanent test current. So that the installation of our daytime running lights and the omission of the standard fog lights no error message is displayed, we offer these resistors for our daytime running lights.Scope of delivery:1x resistor 55 watts / 6 ohms with a H11 plug1x resistor 50 Watt / 6 Ohm with two H11 plugsSuitable for vehicles with Can-Bus system!Cable length: 0,5mwith one waterproof 2-pin plug (H11)We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be glad to help you.

The offered daytime running light + fog lights is a vehicle-specific article. The daytime running light fits into the original cutouts of the fog lights. The mounting is done on the existing mounting points on the bumper.Our 2in1 daytime running lights are designed for vehicles with stock fog lights. If your vehicle does not have original fog lights, then you need not only a corresponding trim with cutout in the front for the fog lights but also a daytime running light set with a separate on and off switch for the fog lights.Please select the appropriate set in our store!The delivery of the daytime running lights is done with a H11 plug (the picture above shows a HB4 plug). This plug is suitable for some vehicles (such as partially VW, Audi, Seat, etc....). If this is not suitable for your model, our H11 plug must be replaced by a vehicle-specific plug. This is unfortunately not offered by us. You also have the option to disconnect the connectors and connect the cables.Vehicles with Can-Bus-System!The vehicles of the newer generation are nowadays equipped with so-called Can-Bus or LIN-Bus systems, which check the light, display and turn signal function by means of a low, permanent test current. So that after the installation of our daytime running lights+fog lights and the omission of the standard fog lights no error message is displayed, we can supply together with the lights a load resistor, which is connected to the connection cables of the fog lights. So you can install the set on your vehicle without any error. Please notify us after your purchase if your vehicle is equipped with a CanBus system.Approval Regulations:Europe-wide approval thanks to ECE, E11, R87 and RL designation.Thanks to the E- and F-approval marks on the lens, the article is 100% road legal andapproved in road traffic and registration-free.The daytime running lights do not have to be entered in the vehicle documents.Thanks to the test marks on the diffusing lens of the daytime running lights, no documents (such as test reports, ABE, etc.) need to be carried with the vehicle documents.For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The offered daytime running light is a vehicle-specific article, specifically for the Fiat Ducato (06-13) / Peugeot Boxer (06-13) / Citroen Jumper (06-13). The daytime running light fits into the original cutouts of the fog light cover. It is mounted to the existing mounting points with a vehicle specific mounting adapter in the bumper. If your vehicle does not have standard fog lights, you can purchase such a cover with appropriate recesses inexpensively from your vehicle dealer or on the Internet.Important:The lights cannot be used as cornering lights (function is omitted on your vehicle, if available).The daytime running lights are replaced by the factory-fitted fog lights. The fog function is omitted.The daytime running lights are supplied with dimming function.Details:Set of 2 daytime running lights (right + left) with very powerful white LED.The control unit of the LED is already built inextremely durable LED with very high luminosity / bright white signal light - not comparable with the light of the original fog lightseasy installation thanks to special vehicle-specific bracketswaterproof robust plastic housingdaytime running light dims down by 50% when the low beam is switched onno measurable additional power consumption compared to driving without lightspower consumption: 12 Volt = 3,4 WSTVO / TÜV approval (100% registration free!)Since 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our articles. We will be happy to help you.

The offered daytime running light is a vehicle-specific article, specifically for the Fiat Ducato (06-13) / Peugeot Boxer (06-13) / Citroen Jumper (06-13). The daytime running light fits into the original cutouts of the fog light cover. It is mounted to the existing mounting points with a vehicle specific mounting adapter in the bumper. If your vehicle does not have standard fog lights, you can purchase such a cover with appropriate recesses inexpensively from your vehicle dealer or on the Internet.Important:The lights cannot be used as cornering lights (function not applicable to your vehicle, if available). The daytime running lights are replaced with the factory-fitted fog lights. The fog function is omitted. The daytime running lights are supplied without dimming function.Details:Set of 2 daytime running lights (right + left) with very powerful white LED.The control unit of the LED is already built inextremely durable LED with very high luminosity / bright white signal light - not comparable with the light of the original fog lightseasy installation thanks to special vehicle-specific bracketswaterproof robust plastic housingthe daytime running light switches off automatically when the low beam is switched onno measurable additional power consumption compared to driving without lightspower consumption: 12 Volt = 3,4 WSTVO / TÜV approval (100 % registration free!)Since 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our articles. We will be happy to help you.

Cool styling for the interior of your truck, camper, off-road vehicle, van or car. The illuminated fingers are supplied with a 24-volt bulb, but you can also replace this bulb with a 12-volt bulb so that you can also use the illuminated fingers with 12 volts. The illuminated finger lights up on both sides, one side red and the other side orange. A chrome ring is attached on the outside for decoration.

Cool styling for the interior of your truck, camper, off-road vehicle, van or car. The illuminated fingers are supplied with a 24-volt bulb, but you can also replace this bulb with a 12-volt bulb so that you can also use the illuminated fingers with 12 volts. The illuminated finger lights up on both sides, one side red and the other side orange. A chrome ring is attached on the outside for decoration.

Extremely flat light with white lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.