LED spotlight

Protect your headlights from dirt and damageOur cover cap for the 7" Night Raptor LED spotlight is an indispensable accessory to protect the spotlight from dirt, dust and damage. The cover cap is made of high-quality material and fits perfectly on your LED spotlight. It is easy to install and provides excellent protection for your headlights.We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

20" LED lightbar/headlamp with 12 high-power LEDs á 7 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Newly developed LED spotlight incl. LED parking light ring. Due to the multi-voltage connection, this headlight can be used equally for cars, SUVs and trucks. Approved as a driving lamp incl. parking light ring. All required approval marks are present on the lens. Rugged and durable stainless steel housing.We have been offering off road accessories for 40 years with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

12" LED light bar/headlamp with 20 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

38" LED lightbar/headlamp with 84 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

20" LED lightbar/headlamp with 42 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

7" LED lightbar/headlamp with 40 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc.Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

4" LED lightbar/headlamp with 20 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Even off-road, in rough terrain, our Lightbars can be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.