Black frontbar suitable for Suzuki Jimny GJ/HJ (2018-)

Suitable for all lamp bars, front protection bars and roll bars with a tube diameter of 60mm to 76mm.The Rugged Ridge X-Clamp headlight clamp made of black aluminum is ideal for the additional attachment of headlights, beacons, etc. It uses the state-of-the-art Pivotal Fit technology and can be adjusted to the tube diameter by using the different screws included in the scope of delivery. Very stable design that enables extremely low-vibration installation of additional headlights.No other clamp on the market offers such a perfect fit for such a wide range of pipe diameters! The clamp has a 12mm hole, so you can easily attach the headlights or rotating beacons. If the clamp is fastened upside down, it can even be mounted on e.g. bull bars that are placed very close to the body.The headlights shown are not included!For 40 years we have been offering off-road accessories with service and headquarters in Germany. Ask us to learn more about our items. We're here to help.

Unsere 4" Side Shooter LED Lightbar ist ein leistungsstarker Zusatzscheinwerfer mit ECE R149 Zulassung als Fernscheinwerfer. Durch seine kompakte Bauweise ist der kleine LED Würfel vielseitig einsetzbar.Somit sorgt der Scheinwerfer für mehr Sicherheit auf dunklen, unbeleuchteten Straßen. Auch abseits der Straße im rauen Gelände können unsere Lightbars in Kombination mit unseren Frontbügeln, Überrollbügeln etc. vielseitig eingesetzt werden. Durch den Multivoltanschluss von 9-32 Volt bietet der Scheinwerfer einen weiten Fahrzeugverwendungsbereich für z.B. Off-Road Fahrzeuge, Jeep´s, Pickup´s, US-Cars, LKW´s, SUV´s, AT´s, Traktoren, Bagger, Boote, Motorräder etc. Das druckdichte Alugussgehäuse sorgt für Schutz gegen Wasser, Staub und Schmutz.Durch die jeweils seitlichen 3 LED´s, kann der Side Shooter das Licht bis zu einem Abstrahlwinkel von 180° verteilen.Bitte beachten Sie, dass nur Lightbars/Scheinwerfer die der europäischen ECE-Norm entsprechen im Straßenverkehr zugelassen sind. Alle anderen Scheinwerfer ohne ECE-Kennzeichnung sind nur als Arbeitsscheinwerfer zugelassen und dürfen im Straßenverkehr nicht verwendet werden. Unsere Scheinwerfer haben alle nötigen Prüfzeichen gemäß STVZO und sind 100% eintragungsfrei.Straßenzulassung/Rechtlich Hinweise:STVO Zulassung nahezu weltweit dank E-Prüfzeichen gemäß ECE-Regelung 149 als Fernscheinwerfer & Elektromagnetische Verträglichkeit zertifiziert nach ECE R10.Prüfzeichen: PL = Scheinwerfer mit KunststoffabdeckungPrüfzeichen: E9 = EU-Land, dass die Genehmigung erteilt hat. 9 = SpanienPrüfzeichen: R10 = FunkentstörungGemäß Zulassungsverordnung muss dieser Scheinwerfer paarweise verbaut werden

4" LED lightbar/headlamp with 20 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Even off-road, in rough terrain, our Lightbars can be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Die schwarze Alu-Scheinwerfer-Schelle ist passend für alle Lampenbügel, Frontschutzbügel und Überrollbügel mit einem Rohrdurchmesser von 75-78 mm.Diese ist ideal für die zusätzliche Befestigung von Scheinwerfern, Rundumleuchten etc. Die Ausführung ist sehr stabil mit einer Breite von 50 mm . Die Schelle hat eine Bohrung von 14 mm, so können Sie die Scheinwerfer oder Rundumleuchten leicht befestigen. Zusammengehalten werden die beiden Teile der Halterung mit einer Innensechskantschraube. Der Gesamtdurchmesser der Schelle beträgt 78 mm. Im Lieferumfang ist eine durchsichtige, biegsame Kunststoffeinlage enthalten. Durch diese Einlage erreicht die Scheinwerfer-Schelle einen Rohrdurchmesser von 75-78 mm und hat einen sehr festen Halt auf dem Bügel.Die Kunststoffeinlage hat den zusätzlichen Vorteil, dass das Rohr vor Kratzern geschützt ist. Die Einlage wird zwischen die Schelle und das Rohr gelegt und verhindert somit den direkten Kontakt zwischen Rohr und Schelle.Seit 40 Jahren bieten wir Off Road-Zubehör mit Service und Firmensitz in Deutschland an. Fragen Sie uns, um mehr zu unseren Artikeln zu erfahren. Wir helfen Ihnen gerne weiter.

7" LED lightbar/headlamp with 40 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc.Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

20" LED lightbar/headlamp with 42 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

12" LED light bar/headlamp with 20 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

20" LED lightbar/headlamp with 12 high-power LEDs á 7 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

To add the finishing touches to the look and performance of your vehicle, Eibach Pro-Spacers have been developed. Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition when the standard or accessory wheel lacks the final visual kick. With the matching Eibach Pro-Spacer, your vehicle gets an even sportier look because the wheels and tyres really fill out the wheel arches this way. The precise adjustment of the track width not only improves the appearance of your vehicle, but also optimises the handling and the rolling tendency. Simply use the help video to determine the correct dimensions and then order the appropriate wheel spacers:You can see the correct installation of the wheel spacers here:Suitable for the following vehicles:Manufacturer: Suzuki (J) / 7102Description: Jimny (2WD / 4WD)Type: GJ / HJYear of construction: 07/2018-ETG-No.: e6*2007/46*0253*.., e6*2007/46*0515..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To add the finishing touches to the look and performance of your vehicle, Eibach Pro-Spacers have been developed. Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition when the standard or accessory wheel lacks the final visual kick. With the matching Eibach Pro-Spacer, your vehicle gets an even sportier look because the wheels and tyres really fill out the wheel arches this way. The precise adjustment of the track width not only improves the appearance of your vehicle, but also optimises the handling and the rolling tendency. Simply use the help video to determine the correct dimensions and then order the appropriate wheel spacers:You can see the correct installation of the wheel spacers here:Suitable for the following vehicles:Manufacturer: Suzuki (J) / 7102Description: Jimny (2WD / 4WD)Type: GJ / HJYear of construction: 07/2018-ETG-No.: e6*2007/46*0253*.., e6*2007/46*0515..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To give the finishing touch to the look and performance of your vehicle, the Eibach Pro-Lift kits have been developed. Give your vehicle a cross feel with standard comfort. The additional ground clearance of up to 30mm invite you to excursions off the tarred road.Suitable for the following vehicles:Manufacturer: Suzuki/SantanaTrade name: Jimny (2WD/4WD)Vehicle type: GJ/HJYear of construction: 10/2018-With EC-BE No.: e6*2007/46*0253*.., e6*2007/46*0515.. For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Radiator grille made of chromed plastic without Suzuki emblem. Suitable for Suzuki Jimny GJ / HJ models from 2019. The standard grille must be removed and our grille is then installed instead.Vehicle type:Vehicle manufacturer : Suzuki/Santana.Designation: Jimny (2WD/4WD)Type: GJ/HJYear of manufacture: 10/2018-ETG No.: e6*2007/46*0253*.., e6*2007/46*0515..  We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be glad to help you.