Chassis & Shock Absorbers

You are not satisfied with the handling of your Jeep. Bilstein gas pressure shock absorbers are developed in Germany and are tailored to European road conditions. Shock absorbers from the USA are often not adapted to the needs of Europeans. The shock absorbers were manufactured and developed in cooperation with the Bilstein chassis specialists in Germany and adapted to European road conditions. Many shock absorbers on the market are not even remotely comparable to the top quality of our shock absorbers! Bilstein B6 gas pressure shock absorbers to replace the shock absorbers for vehicles with a lift of up to 30mm. Significantly improves handling and increases ride comfort. Whether on-road or off-road, the BILSTEIN B6 Off-Road guarantees balanced driving behaviour, perfect handling and absolute vehicle control in every driving situation. The BILSTEIN B6 Off-Road, equipped with the special BILSTEIN monotube gas pressure technology, degressive rebound damping and tightly tuned compression damping, prevents uncontrolled vibrations of the body or axles. The steering gains precision and the load capacity of the chassis is much higher with high payloads, drawbar loads or fast off-road driving.Important information:Our shock absorbers are manufactured by Bilstein exclusively for us in Germany. They are not to be compared with other shock absorbers for the JK, which are also offered by Bilstein, as these are shock absorbers from the USA, which are only produced for the requirements there.This means that these shock absorbers are much softer and "spongier" than our shock absorbers, which have been specially adapted to European requirements and road conditions.The product advantages at a glance:      - BILSTEIN monotube/upside-down technology      - Tuned in the BILSTEIN road test      - BILSTEIN setting with "Comfort & Sport      - High power reserves      - No TÜV registration necessaryThe shock absorbers are only available as a set (front & rear axle) and not individually !Suitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDescription: Jeep WranglerKW-range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

We are selling here the suspension springs incl. TÜV certificate for the new Jeep Wrangler JK. The ride height is 30mm. The springs were manufactured in cooperation with the suspension specialists of Eibach in Germany and adapted to the European road conditions. They are not produced in the USA, as the demands on the suspension in Europe are completely different from those in the USA.Our springs are coil springs with TÜV-certificate and 30mm height adjustment under consideration of the current EU-regulations for the protection of pedestrians. Compare us with the other suppliers and be careful. Suspensions from the USA are for the most part not tested according to EU regulations, i.e. are also offered without a TÜV certificate. When installing these suspensions, the operating licence of your vehicle expires !Advantages at a glance:Top performance handlingOptimum ride qualityAlternatively, we can also offer you shock absorbers or a complete suspension system. Please have a look in our shop.Suitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDescription: Jeep WranglerKW-Range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

Our suspension consists of coil springs +30 mm and monotube high-performance gas pressure dampers. Delivery takes place with TÜV parts certificate. You will receive from us a 30 mm suspension system that has been tested in accordance with the current guidelines for pedestrian protection (2009/102/EEC) and is TÜV-approved.The difference to other suspension systems:The springs and shock absorbers were manufactured and developed in cooperation with the suspension specialists from Eibach and Bilstein in Germany and adapted to European road conditions. The precise tuning of Eibach suspension springs and Bilstein shock absorbers reduces the uncontrolled movement of the Jeep Wrangler's high body. The proven BILSTEIN upside-down technology ensures that the support and lateral forces are distributed over a large area and there is a significant increase in torsional rigidity in the connection between the wheel and the body. This significantly improves ride comfort on the road. The steering precision and the load capacity of the vehicle are increased. This guarantees more vehicle control, safer handling, as well as better traction.Suspensions of e.g. 50, 70 and even 100 mm lift require an additional test (crash test) to fulfil these legal guidelines.If a suspension of more than 30 mm is not tested accordingly, it no longer fulfils these guidelines and the TÜV parts certificate is no longer valid. Please note that the operating licence of your vehicle may also expire if such a suspension system is installed without a valid TÜV parts certificate.Exception: imported vehicles from the USA with individual type approval!Important information:Our shock absorbers are manufactured by Bilstein exclusively for us in Germany. They are not to be compared with other shock absorbers for the JK, which are also offered by Bilstein, as these are shock absorbers from the USA, which are only produced for the requirements there.This means that these shock absorbers are much softer and "spongier" than our shock absorbers, which have been specially adapted to European requirements and road conditions.The product advantages at a glance:- BILSTEIN monotube/upside-down technology. - BILSTEIN setting with "Comfort & Sport - High power reserveSuitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDesignation: Jeep WranglerKW range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.