Black frontbar suitable for Fiat Fullback (2016-2020)

Suitable for all lamp bars, front protection bars and roll bars with a tube diameter of 60mm to 76mm.The Rugged Ridge X-Clamp headlight clamp made of black aluminum is ideal for the additional attachment of headlights, beacons, etc. It uses the state-of-the-art Pivotal Fit technology and can be adjusted to the tube diameter by using the different screws included in the scope of delivery. Very stable design that enables extremely low-vibration installation of additional headlights.No other clamp on the market offers such a perfect fit for such a wide range of pipe diameters! The clamp has a 12mm hole, so you can easily attach the headlights or rotating beacons. If the clamp is fastened upside down, it can even be mounted on e.g. bull bars that are placed very close to the body.The headlights shown are not included!For 40 years we have been offering off-road accessories with service and headquarters in Germany. Ask us to learn more about our items. We're here to help.

Foldable cargo cover specially designed for your vehicle. Extremely resistant and hard-wearing. So you not only secure your cargo, but also protect the loading area from the weather at the same time. The cover is designed so that even thieves don't stand a chance. When the cargo area cover is locked, there is no way for thieves to steal the cargo.Another advantage of a cargo cover is the reduction of air resistance. Turbulence is greatly reduced. This can also lead to a reduction in fuel consumption.The installation is very easy and can be done in a few minutes, because the cargo cover is already pre-assembled and delivered to your home. The mounting brackets are embedded directly into the cover. The assembly, disassembly and opening work without the use of additional tools. The folded cover can be conveniently and easily secured to the vehicle with the safety straps that are also provided on the cover.The panels are made of high quality black textured aluminum and filled in the middle with a special foam compound. The panels are connected with a robust aluminum linkage.The cargo area covers can be used with "underrail" cargo area trays without any problems: The "underrail" plastic tray closes at the lower edge of the tail lift. The "overrail" cargo area tray rests on the loading edge, holes must be cut in the plastic tray to install the cargo area cover.Scope of delivery:1x 3-piece load compartment cover (pre-assembled)4x locking pinGerman assembly instructionsDetails:Foldable - hard cover - cargo coverTemperature resistant and impact resistantEasy and fast mountingFastening: Clamp mountImproved aerodynamics when cover is unfoldedCollapsible when not in use or when carrying a large loadHigh quality, durable black grained plasticin combination with robust aluminumLength: approx. 152 cmWidth: approx. 146 cmVehicle data:Manufacturer: Fiat (I)Designation: FullbackType: KTOTYear of manufacture: 06/2016-07/2020ETG-No.: e1*2007/46*1398*....Only suitable for double cabWe have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be glad to help you.

Die schwarze Alu-Scheinwerfer-Schelle ist passend für alle Lampenbügel, Frontschutzbügel und Überrollbügel mit einem Rohrdurchmesser von 75-78 mm.Diese ist ideal für die zusätzliche Befestigung von Scheinwerfern, Rundumleuchten etc. Die Ausführung ist sehr stabil mit einer Breite von 50 mm . Die Schelle hat eine Bohrung von 14 mm, so können Sie die Scheinwerfer oder Rundumleuchten leicht befestigen. Zusammengehalten werden die beiden Teile der Halterung mit einer Innensechskantschraube. Der Gesamtdurchmesser der Schelle beträgt 78 mm. Im Lieferumfang ist eine durchsichtige, biegsame Kunststoffeinlage enthalten. Durch diese Einlage erreicht die Scheinwerfer-Schelle einen Rohrdurchmesser von 75-78 mm und hat einen sehr festen Halt auf dem Bügel.Die Kunststoffeinlage hat den zusätzlichen Vorteil, dass das Rohr vor Kratzern geschützt ist. Die Einlage wird zwischen die Schelle und das Rohr gelegt und verhindert somit den direkten Kontakt zwischen Rohr und Schelle.Seit 40 Jahren bieten wir Off Road-Zubehör mit Service und Firmensitz in Deutschland an. Fragen Sie uns, um mehr zu unseren Artikeln zu erfahren. Wir helfen Ihnen gerne weiter.

4" LED lightbar/headlamp with 20 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Even off-road, in rough terrain, our Lightbars can be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

7" LED lightbar/headlamp with 40 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc.Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function