Compressor horns

For all those who find a compressed air horn with a "normal" compressor too quiet, we offer here the ultimate sound machine for boats. The air pressure provides the "right sound". The piston compressor keeps the pressure in the air tank permanently at 6 -7 bar. If the pressure drops below 5 bar, the compressor is switched on by the integrated pressure switch and the boiler pressure is rebuilt. The pressure of 6 - 7 bar is led from the air tank, by means of high pressure hose to the double horn. At the air horn is a solenoid valve in 12 volts, which opens as soon as the impulse / current is given with the separate horn button or on / off switch (does not belong to the scope of supply). The unit is delivered complete with a compressed air horn.Technical data / dimensionsCompressor:13 x 8 cm12 Volt, 15 A, low maintenance and powerfulAir tank:25 x 15cm2 liters capacityHorn:Length 30 / 23 cmhigh gloss chrome plated funnelPressure:6 to 7 barTube:2m plastic hose 1/4" ODActuation:Electrovalve / horn buttonVolume:125 db ! - Manufacturer specification420 / 380 Hz.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Compact double horn for mounting on off-road vehicles, vans and cars. No cheap import from the Far East - but Made in Europe ! High quality brass chrome plated funnel !We can offer you the compressors in 1,0 bar and 2,0 bar also as replacement. You can find these compressors and other accessories in the category "Accessories & Spare Parts".

Compact double horn for mounting on off-road vehicles, vans and cars. No cheap import from the Far East - but Made in Europe ! High quality brass chrome plated funnel !We can offer you the compressors in 1,0 bar and 2,0 bar also as replacement. You can find these compressors and other accessories in the category "Accessories & Spare Parts".

Compact double horn for mounting on off-road vehicles, vans and cars. No cheap import from the Far East - but Made in Europe ! High quality brass chrome plated funnel !We can also offer you the compressors in 1.0 bar and 2.0 bar as replacements. You can find these compressors and other accessories in the category "Accessories & Spare Parts".

Compact double horn for mounting on off-road vehicles, vans and cars. No cheap import from the Far East - but Made in Europe ! High quality brass chrome plated funnel !We can offer you the compressors in 1,0 bar and 2,0 bar also as replacement. You can find these compressors and other accessories in the category "Accessories & Spare Parts".

Small, compact and powerful. Mounting without clamp. The compressor is simply suspended from the existing screw.No cheap import from the Far East - but Made in Europe !Approval regulations of air horns and compressor fanfares:If sound horns are used as additional signaling equipment, they do not have to be approved or registered. The installation must be done in a way that general safety regulations are not violated (risk of injury by accident). For example, mounting at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

Small, compact and powerful. Mounting without clamp. The compressor is simply suspended from the existing screw.No cheap import from the Far East - but Made in Europe !Approval regulations of air horns and compressor fanfares:If sound horns are used as additional signaling equipment, they do not have to be approved or registered. The installation must be done in a way that general safety regulations are not violated (risk of injury by accident). For example, mounting at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

A MARCO top product that builds up the pressure very quickly. As a result, the horn starts up faster and is much louder than when using a series compressor.No cheap import from the Far East - but Made in Europe !Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as additional signaling equipment, they do not have to be approved or registered. The installation must be done in a way that general safety regulations are not violated (risk of injury by accident). For example, installation at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

A MARCO top product that builds up the pressure very quickly. As a result, the horn starts faster and is much louder than when using a series compressor.No cheap import from the Far East - but Made in Europe !Approval regulations of compressed air horns and compressor fanfares:If sound horns are used as additional signaling equipment, they do not have to be approved or registered. The installation must be done in a way that general safety regulations are not violated (risk of injury by accident). For example, mounting at a height of more than 2 meters is unobjectionable, as well as below the bumper or under the hood of the vehicle.Excerpt from the German Road Traffic Licensing Regulations (StVZO)§ 55 Devices for acoustic signals(1) Motor vehicles shall have at least one audible warning device, the sound of which shall alert vulnerable road users to the approach of a motor vehicle without startling them and causing more than unavoidable annoyance to others. Where more than one audible warning device is installed, it must be be ensured that only one device can be actuated at a time. Switching to one or the other device shall not permit the emission of a sequence of sounds of different fundamental frequencies.(2) Horns and horns that produce a sound with constant fundamental frequencies (including harmonic chords) that is free of extraneous noise may be installed as devices for sound signals. The sound level shall not exceed 105 dB(A) at any point 7 m from the location of the sound source on the vehicle and at a height range of 500 mm to 1 500 mm above the roadway. Measurements shall be made in an open space with as smooth a surface as possible, in the absence of wind; obstacles (trees, bushes, etc.) that may interfere by reverberation or attenuation shall be at least twice as far away from the sound source as the sound receiver.

Special compressor horn for boats. Side air connection to the funnel. The horn can be switched from alternating tone sequence to a dual tone. Special compressor with different connection possibilities, which cannot be replaced by items 504 or 1020.

Compact electro-pneumatic air horn with strong single tone. The integrated compressor allows the immediate output of the sound by pressing the switch. It does not require a hose. Easy and quick to install.Made in Italy - not a cheap import from the Far East.

No cheap import from the Far East - but Made in Europe!Newly developed compressor single horn. Bright chrome plated super long funnel, deep sound and all with a compressor.No cheap import from the Far East - but Made in Europe! High quality brass chrome plated funnel.