Vitara

The spinners bring real racing design to the look of your vehicle - quickly and absolutely individually.The spinners (3-star center caps) are invisibly screwed to the hub cover of the rim. Quickly mounted - cool look. When mounting, make sure that the spinners do not protrude beyond the rim or vehicle width.Dimensions:Height 3cmDiameter 14cmDiameter without wings 8cmScope of delivery:1x Spinner (please buy the desired quantity!)Material spinner: chrome-plated metal / middle cover plastic blackMounting material (screw + nut)Important!The pictured cover plate of the rim is not included but should already be present on your rim.The hub covers are not approved according to StVZO, even if they do not extend beyond the rim.Note on mounting: The spinners are screwed to the hub cap / hub cover. For this purpose, a hole must be drilled in the hub cap. The spinner is then placed on the hub cap and the bolt is passed through and fastened from behind with the nut. Finally, the black cap is placed on top and nothing can be seen of the screw connection.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The exclusive wheel cover. Highly polished stainless steel tire cover complete with stainless steel ring, black plastic center plate and keder tape running around both sides. The stainless steel ring is lockable, the smooth surface of the center plate can easily be painted or covered with foil. Excellent as an advertising medium. The high quality resistance and the good cleanability are further features of this convincing product. For other tire sizes and vehicles we also offer a tire cover. Please have a look in our ebay store under spare wheel covers - stainless steel tire cover!Scope of delivery:1x stainless steel tire cover1x black plastic center plate1x lock with 2 keysTire sizes: (this tire cover fits for the following size)205/75R15 (e.g. Suzuki Grand Vitara + Suzuki Vitara + Suzuki Samurai + Suzuki SJ410 + etc.)Details:Ring circumference: 217.6cmRing width: 18cmDiameter cover plate: 67.5cmPlease check the exact size on the spare wheel before ordering!Please note, however, that the tire cover is always designed only for normal road tires, should you drive a rim with e.g. coarse profile (all-terrain), then please measure your tire before again. The scope of our tire cover can be found above in the description under details.For other tire sizes and vehicles we also offer a tire cover.For 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our items. We will be happy to help you.

Stainless steel hub cap with open hub cover for freewheel hubs.High quality and 100% accurate fit.Suitable e.g. for the following vehicle types:Jeep CJ 5-7Ford various modelsSuzuki SamuraiSuzuki VitaraToyota various modelsAttention !!!The offered article is not suitable for Mangels rims !For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our articles. We will be happy to help you.

Extremely flat light with orange lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Extremely flat light with white lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-Width 140 mm x depth 175 mm x height 110 mm incl. foot.-output temperature fan heater: approx. 50° degrees-Cable length: approx. 2.5 mtr.-Cable with integrated plug fuse 30 A and plug connector for direct connection to the battery-360° rotating base (adjustable in lateral orientation as well as inclination)-heating and separate fan function-Material inside: Polyamide 66 CF20 (high dimensional stability)-Onboard voltage: 12 volts-Nominal power at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)-Peak power at 13.8 volts (running engine or new battery)approx. 22 amps (300 watts)Quick assembly / disassembly of the fan heater is done with Velcro tape (see picture above), alternatively the base can be screwed. Easy mounting of the fan heater on the adjustable stand (see picture above). The cable can be laid through the interior to the engine compartment, depending on the possibility.Through the connector plug, the fan can be easily removed at any time.The connection is then made directly to the fuse box or the battery (see pictures above).Several switch functions are available for selection:1. switch top = only fan / blower.2. switch down = heating with half fan power3. both switches = heating with full power / full blowerFan heater usage note: The fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from highly flammable materials. Do not block the ventilation flaps.  We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption. If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur. A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-300 watts-12 volts-current consumption: approx. 24-27 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Universal fitting lamp bracket made of stainless steel, highly polished for roof mounting. Brackets for 4 headlights are already present on the lamp bracket (headlights must be ordered separately). Internal cable routing. Suitable for all headlight sizes, except item number 1811! Dimensions :Width: 120 cmDepth : 26 cmDiameter of the tubes: 32 mmThe pictured headlights must be ordered separately, please see our store. The lamp bracket is delivered without TÜV certificate.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our articles. We are happy to help you.

Universal fitting lamp bracket made of stainless steel, highly polished for roof mounting. Brackets for 4 headlights are already present on the lamp bracket (headlights must be ordered separately). Internal cable routing. Suitable for headlights up to a diameter of 17cm.Dimensions :Width 96cmDepth about 27cmDiameter of the tubes 26mm The pictured headlights must be ordered separately, please see our store. The lamp bracket is delivered without TÜV certificate.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The exclusive wheel cover. Highly polished stainless steel tyre cover complete with stainless steel ring, black plastic centre plate and piping on both sides. The stainless steel ring is lockable, the smooth surface of the centre plate can easily be painted or covered with foil and is therefore an excellent advertising medium. The high quality resistance and good cleanability are further features of this convincing product.Suitable for vehicles with spare wheel tyres:205/70R15 such as VW T5, Suzuki Samurai, Suzuki Jimny, Suzuki Vitara....Please check the exact size on the spare wheel before ordering! Please note, however, that the tyre cover is only designed for normal road tyres. If you are using a rim with a coarse tread (all-terrain), for example, please measure your tyre again beforehand. You can find the circumference of our tyre cover under the tab Technical Details. Further spare wheel covers for other tyre sizes can be found in our shop under Spare Wheel Covers.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Fits all Suzuki Vitara with original linkage and hook attachment on the frontWindshield frame above (no push buttons!).Only suitable for the Japanese Vitara models (JSA)!!! Not for Vitara Santana and the US and Canada model!!!A replacement soft top in excellent quality from the manufacturer Bestop with extra thick soft top skin.The special soft top fabric is extremely durable and offers an optimal stretching behavior. The soft top colorsdo not fade. The windows and the soft top are sewn and additionally glued, the rear window can be removed with a zipper. Can be removed with a zipper.Scope of delivery:1x soft top fabric black single layer without linkage with structured and tear-resistant surfaceweather and UV resistant PVC top fabricAssembly instructions in EnglishDetails:1-piece replacement soft top (without linkage!)incl. side windows clear (not removable!)incl. rear window clear with zipper (removable!)100% exact fit for original linkagesewn hood transitionsAssembly:The soft top skin is simply replaced and pulled over the original linkage.Please note that the original linkage is always needed to mount this hood skin.to be able to mount this canopy. The linkage is not part of the delivery and we do not have this in our assortment.Info's about the soft top manufacturer:Bestop is the world's largest soft top manufacturer. This is original equipment manufacturer for many vehicles such as Jeep, Suzuki and delivers the tops directly to these companies. Thus you receive a soft top, which is optimally to your vehicle. No fit or quality problems!For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.