Side sill protection set stainless steel suitable for Jeep Wrangler JK 2007-2018 (2-door)

Extremely robust, black-striped, 3-piece front bumper. The solid 3mm thick steel bumper gives your vehicle that unmistakable look. The bumper is mounted at the original attachment points. Additional drillings are not necessary.The bumper has mounting holes for the fog lights, these headlights are also included in the scope of delivery including an E-mark. Corresponding headlight holders are also included in the scope of delivery. The supplied bracket can be easily mounted or dismounted and has a height of approx. 19cm (measured from the bumper). To achieve more off-road mobility, the bumper corners can be removed without much effort. Tyre sizes up to 37" can be driven without any problems. The winch plate included in the scope of delivery allows the use of all common winches with a hole pattern for fastening of approx. 254x114mm.The delivery does not include a parts certificate, material certificate or test report. The entry in the vehicle documents must be made by individual approval, e.g. as an equipment carrier for a winch. The installation will invalidate the vehicle's operating permit unless an inspection is carried out immediately in accordance with StVZO §19, Para. 2 in conjunction with §21. After the technical modification has been carried out, the vehicle must therefore be immediately presented to an officially recognised expert at a technical inspection centre. Please inform yourself in advance about this at your local TÜV.Suitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDesignation: Jeep WranglerKW range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

This award-winning Classic Trek Top by Bestop, with sun canopy function, combines style and functionality in one product. Many small details round off this top and offer a high level of comfort and driving pleasure.The top can be combined with the standard steel doors or half doors. A soft top that is easy and hassle-free to operate.Standard convenience: Quick and easy installation or removal without complicated linkage.The Trek Top Classic soft top can be opened (rolled up) over the front and rear seats in a few easy steps.Scope of delivery:1x Classic Trek Top black / black diamondMounting material with door surrounds complete for initial assemblyFitting instructions in EnglishInfo's about the soft top manufacturer:Bestop is the world's largest soft top manufacturer. It is the original equipment manufacturer for many vehicles, e.g. Chrysler Jeep, Suzuki and supplies the soft tops directly to these companies. This means that you receive a soft top that is optimally matched to your vehicle. No fit or quality problems!Suitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDescription: Jeep WranglerKW-Range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

You are not satisfied with the handling of your Jeep. Bilstein gas pressure shock absorbers are developed in Germany and are tailored to European road conditions. Shock absorbers from the USA are often not adapted to the needs of Europeans. The shock absorbers were manufactured and developed in cooperation with the Bilstein chassis specialists in Germany and adapted to European road conditions. Many shock absorbers on the market are not even remotely comparable to the top quality of our shock absorbers! Bilstein B6 gas pressure shock absorbers to replace the shock absorbers for vehicles with a lift of up to 30mm. Significantly improves handling and increases ride comfort. Whether on-road or off-road, the BILSTEIN B6 Off-Road guarantees balanced driving behaviour, perfect handling and absolute vehicle control in every driving situation. The BILSTEIN B6 Off-Road, equipped with the special BILSTEIN monotube gas pressure technology, degressive rebound damping and tightly tuned compression damping, prevents uncontrolled vibrations of the body or axles. The steering gains precision and the load capacity of the chassis is much higher with high payloads, drawbar loads or fast off-road driving.Important information:Our shock absorbers are manufactured by Bilstein exclusively for us in Germany. They are not to be compared with other shock absorbers for the JK, which are also offered by Bilstein, as these are shock absorbers from the USA, which are only produced for the requirements there.This means that these shock absorbers are much softer and "spongier" than our shock absorbers, which have been specially adapted to European requirements and road conditions.The product advantages at a glance:      - BILSTEIN monotube/upside-down technology      - Tuned in the BILSTEIN road test      - BILSTEIN setting with "Comfort & Sport      - High power reserves      - No TÜV registration necessaryThe shock absorbers are only available as a set (front & rear axle) and not individually !Suitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDescription: Jeep WranglerKW-range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

We are selling here the suspension springs incl. TÜV certificate for the new Jeep Wrangler JK. The ride height is 30mm. The springs were manufactured in cooperation with the suspension specialists of Eibach in Germany and adapted to the European road conditions. They are not produced in the USA, as the demands on the suspension in Europe are completely different from those in the USA.Our springs are coil springs with TÜV-certificate and 30mm height adjustment under consideration of the current EU-regulations for the protection of pedestrians. Compare us with the other suppliers and be careful. Suspensions from the USA are for the most part not tested according to EU regulations, i.e. are also offered without a TÜV certificate. When installing these suspensions, the operating licence of your vehicle expires !Advantages at a glance:Top performance handlingOptimum ride qualityAlternatively, we can also offer you shock absorbers or a complete suspension system. Please have a look in our shop.Suitable for the following vehicle type:Manufacturer: Daimler Chrysler (USA)Type: JKDescription: Jeep WranglerKW-Range: 130-209Year of manufacture: 2007-2018ETG-No.: e4*2001/116*0116*--up to supplement 25We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.