Various accessories

Extremely flat light with orange lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Extremely flat light with white lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-Width 140 mm x depth 175 mm x height 110 mm incl. foot.-output temperature fan heater: approx. 50° degrees-Cable length: approx. 2.5 mtr.-Cable with integrated plug fuse 30 A and plug connector for direct connection to the battery-360° rotating base (adjustable in lateral orientation as well as inclination)-heating and separate fan function-Material inside: Polyamide 66 CF20 (high dimensional stability)-Onboard voltage: 12 volts-Nominal power at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)-Peak power at 13.8 volts (running engine or new battery)approx. 22 amps (300 watts)Quick assembly / disassembly of the fan heater is done with Velcro tape (see picture above), alternatively the base can be screwed. Easy mounting of the fan heater on the adjustable stand (see picture above). The cable can be laid through the interior to the engine compartment, depending on the possibility.Through the connector plug, the fan can be easily removed at any time.The connection is then made directly to the fuse box or the battery (see pictures above).Several switch functions are available for selection:1. switch top = only fan / blower.2. switch down = heating with half fan power3. both switches = heating with full power / full blowerFan heater usage note: The fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from highly flammable materials. Do not block the ventilation flaps.  We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption. If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur. A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-300 watts-12 volts-current consumption: approx. 24-27 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The tailgate net is made of weather-resistant, colorfast nylon. Sturdy brackets on both sides ensure a perfect fit. Only four or six holes are required for mounting. Practical and attractive accessory for pickups, which, unlike the normal tailgate, reduces air resistance and thus improves aerodynamics. Universal fit for many pickups.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The tailgate net is made of weather-resistant, colorfast nylon. Sturdy brackets on both sides ensure a perfect fit. Only four or six holes are required for mounting. Practical and attractive accessory for pickups, which, unlike the normal tailgate, reduces air resistance and thus improves aerodynamics. Universal fit for many pickups.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Universal fitting lamp bracket made of stainless steel, highly polished for roof mounting. Brackets for 4 headlights are already present on the lamp bracket (headlights must be ordered separately). Internal cable routing. Suitable for all headlight sizes, except item number 1811! Dimensions :Width: 120 cmDepth : 26 cmDiameter of the tubes: 32 mmThe pictured headlights must be ordered separately, please see our store. The lamp bracket is delivered without TÜV certificate.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our articles. We are happy to help you.

Universal fitting lamp bracket made of stainless steel, highly polished for roof mounting. Brackets for 4 headlights are already present on the lamp bracket (headlights must be ordered separately). Internal cable routing. Suitable for headlights up to a diameter of 17cm.Dimensions :Width 96cmDepth about 27cmDiameter of the tubes 26mm The pictured headlights must be ordered separately, please see our store. The lamp bracket is delivered without TÜV certificate.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Universal fitting shackle with screw thread e.g. for front or rear bumpers.Material: steelColour: blackStrength: 4 tonsSize: 3/4" (dimensions see pictures above)For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

The XXL cable winch scores with its robust design and with a plastic cable. Thanks to integrated overload protection and the splash-proof housing, a long service life is guaranteed.Product details:Dimensions (L/W/H): 527 x 160 x 217 mm.Has high rolling speed and can pull 5.9 tonsMotor power: 5.0 KW - Wound series pulling force: 13000 lbs / 5909 kgTransmission: 3-stage planetary gearGear ratio: 265:1Clutch: manual clutchBraking action: Automatic from drumHole pattern for mounting: 255 x 114 mmColor: blackFor 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our items. We will be glad to help you.

Recovery belt "PROFIOur top product, high-quality heavy-duty recovery belt e.g. for use on the winch or directly on the vehicle. Two-layer, durable synthetic fibre fabric. The green end loops are additionally reinforced.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.