Various accessories

Our fold-out rear step can be easily extended and retracted with one foot. It offers a quick, easy and safe way to access your loading area. Extremely robust, made of mild steel, black powder-coated rear step with a maximum load capacity of 150kg. The anti-slip surface makes it easy for you to load and unload with the tailgate open or closed. The mounting is carried out without additional drilling at the existing fastening points.Note:Fits Limited, Wildtrak, Thunder, Stormtrak, Wolftrak, Ranger Raptor models -Extra cab / double cab.Mounting only possible on the left/driver's sideNOT suitable for L, XL & Ranger Raptor models with full length hitch / square bumper.The installation of a step does not invalidate the operating permit according to § 19.2 StVZO and therefore does not require approval/registration according to § 21 StVZO. In addition, in accordance with EC Regulation 661/2009, steps at the rear of the vehicle must not be taken into account when measuring the vehicle length.Suitable for the following vehicles:Vehicle manufacturer : FordDesignation : Ranger (4WD), Ranger (Raptor 4WD)Type : 2ABYear of manufacture: 2012-2022ETG-No.: e5*2007/46*0080*.., e11*2007/46*0154*.. as of NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Extremely flat light with orange lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Extremely flat light with white lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Extremely robust, black-structured rear bumper in the unmistakable "Black Stealth" look. The solid 3mm thick steel bumper gives your vehicle a brute look. The bumper is mounted to the original mounting points, additional drilling is not necessary. The bumper has mounting holes for the original parking sensors. Number plate lights with E-mark are also included in the scope of delivery. The bumper has a recessed step at both ends. For vehicles with a trailer coupling, a coupling extension is necessary. This is included in the scope of delivery.Parts certificate:The bumper is delivered with a GTÜ parts certificate. For vehicles with a trailer coupling, the coupling extension supplied is required for installation. Coupling extensions are subject to registration. You will receive a GTÜ individual type approval for our coupling extension. We need the chassis number of your Ranger to issue the GTÜ individual type approval. Please therefore send us a copy of your vehicle registration document by e-mail after purchase. With both certificates, nothing stands in the way of registration.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...,  e5*2007/46*0080*..Technical details AHK extension:D-value: 12.08max. drawbar load: 75 kgmax. permissible trailer load: 1975 kg. For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-Width 140 mm x depth 175 mm x height 110 mm incl. foot.-output temperature fan heater: approx. 50° degrees-Cable length: approx. 2.5 mtr.-Cable with integrated plug fuse 30 A and plug connector for direct connection to the battery-360° rotating base (adjustable in lateral orientation as well as inclination)-heating and separate fan function-Material inside: Polyamide 66 CF20 (high dimensional stability)-Onboard voltage: 12 volts-Nominal power at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)-Peak power at 13.8 volts (running engine or new battery)approx. 22 amps (300 watts)Quick assembly / disassembly of the fan heater is done with Velcro tape (see picture above), alternatively the base can be screwed. Easy mounting of the fan heater on the adjustable stand (see picture above). The cable can be laid through the interior to the engine compartment, depending on the possibility.Through the connector plug, the fan can be easily removed at any time.The connection is then made directly to the fuse box or the battery (see pictures above).Several switch functions are available for selection:1. switch top = only fan / blower.2. switch down = heating with half fan power3. both switches = heating with full power / full blowerFan heater usage note: The fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from highly flammable materials. Do not block the ventilation flaps.  We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption. If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur. A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-300 watts-12 volts-current consumption: approx. 24-27 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The tailgate net is made of weather-resistant, colorfast nylon. Sturdy brackets on both sides ensure a perfect fit. Only four or six holes are required for mounting. Practical and attractive accessory for pickups, which, unlike the normal tailgate, reduces air resistance and thus improves aerodynamics. Universal fit for many pickups.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The tailgate net is made of weather-resistant, colorfast nylon. Sturdy brackets on both sides ensure a perfect fit. Only four or six holes are required for mounting. Practical and attractive accessory for pickups, which, unlike the normal tailgate, reduces air resistance and thus improves aerodynamics. Universal fit for many pickups.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Universal fitting lamp bracket made of stainless steel, highly polished for roof mounting. Brackets for 4 headlights are already present on the lamp bracket (headlights must be ordered separately). Internal cable routing. Suitable for all headlight sizes, except item number 1811! Dimensions :Width: 120 cmDepth : 26 cmDiameter of the tubes: 32 mmThe pictured headlights must be ordered separately, please see our store. The lamp bracket is delivered without TÜV certificate.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our articles. We are happy to help you.

Universal fitting lamp bracket made of stainless steel, highly polished for roof mounting. Brackets for 4 headlights are already present on the lamp bracket (headlights must be ordered separately). Internal cable routing. Suitable for headlights up to a diameter of 17cm.Dimensions :Width 96cmDepth about 27cmDiameter of the tubes 26mm The pictured headlights must be ordered separately, please see our store. The lamp bracket is delivered without TÜV certificate.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Set of 2 black covers for the taillights. Suitable for all models. Made of high quality black ABS plastic. Easy installation, the covers are simply glued on.Mounting:the covers are glued directly to the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greasethe application surface must be warm. A minimum temperature of 15°C is requiredafter peeling off the backing film, the surround must be pressed for approx. 1 minute with high and uniform pressure against the surfacewe recommend that you let the vehicle stand for at least 6 hours after installationthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursWe have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.