Various accessories

Our fold-out rear step can be easily extended and retracted with one foot. It offers a quick, easy and safe way to access your loading area. Extremely robust, black powder-coated rear step made of mild steel with a maximum load capacity of 150kg. The non-slip surface makes it easy for you to load and unload with the tailgate open or closed. It can be fitted to the existing fixing points without additional drilling.Note:suitable for Wildtrak, Limited, XL and XLT models - can be fitted on driver and passenger side.NOT suitable for Platinum, Tremor and Ranger Raptor modelsThe installation of a step does not invalidate the operating licence in accordance with § 19.2 StVZO and therefore does not require approval/registration in accordance with § 21 StVZO. In addition, according to EC Regulation 661/2009, steps at the rear of the vehicle may not be taken into account when measuring the vehicle length.Suitable for the following vehicles:Vehicle manufacturer : FordDesignation: Ranger (2WD / 4WD)Type: 2ABYear of construction: 2023-ETG-No.: e5*2007/46*0080*.. from NT 09We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

LED parking light/tail lightLED brake lightLED turn signalLED reversing lightLED rear fog lightwithout E-markPlug & Play connector1 set consisting of 2 rear lights (left+right)E-markThe rear lights have no E-mark. Thus, these are not approved in road traffic.Only for showroom or show purposes.MountingEasy mounting on the original mounting points. The plugs are plug & play.

Scope of delivery:2 pieces surrounds for the taillightsmounting:the surrounds are glued directly onto the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greaseafter removing the backing film, the bezel must be pressed against the surface with high and even pressure for about 1 minutewe recommend you to leave the vehicle for at least 6 hours after mountingthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursVehicle data:Vehicle manufacturer : FordDesignation : Ranger (4WD)Year of manufacture : 2023-ETG No.: e5*2007/46*0080*..We have been providing truck and off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Scope of delivery:2 pieces surrounds for the rear lightsmounting:the surrounds are glued directly onto the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greaseafter removing the backing film, the bezel must be pressed against the surface with high and even pressure for about 1 minutewe recommend you to leave the vehicle for at least 6 hours after mountingthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursVehicle data:Vehicle manufacturer : FordDesignation : Ranger (4WD)Year of manufacture : 2023-ETG No.: e5*2007/46*0080*..We have been providing truck and off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Scope of delivery:2 pieces surrounds for the headlights in the frontmounting:the bezels are glued directly onto the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greaseafter removing the backing film, the bezel must be pressed against the surface with high and even pressure for about 1 minutewe recommend you to leave the vehicle for at least 6 hours after mountingthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursVehicle data:Vehicle manufacturer : FordDesignation : Ranger (4WD)Year of manufacture : 2023-ETG No.: e5*2007/46*0080*..We have been providing truck and off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Scope of delivery:2 pieces surrounds for the headlights in the frontmounting:the bezels are glued directly onto the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greaseafter removing the backing film, the bezel must be pressed against the surface with high and even pressure for about 1 minutewe recommend you to leave the vehicle for at least 6 hours after mountingthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursVehicle data:Vehicle manufacturer : FordDesignation : Ranger (4WD)Year of manufacture : 2023-ETG No.: e5*2007/46*0080*..We have been providing truck and off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Extremely flat light with orange lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Extremely flat light with white lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.

Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-Width 140 mm x depth 175 mm x height 110 mm incl. foot.-output temperature fan heater: approx. 50° degrees-Cable length: approx. 2.5 mtr.-Cable with integrated plug fuse 30 A and plug connector for direct connection to the battery-360° rotating base (adjustable in lateral orientation as well as inclination)-heating and separate fan function-Material inside: Polyamide 66 CF20 (high dimensional stability)-Onboard voltage: 12 volts-Nominal power at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)-Peak power at 13.8 volts (running engine or new battery)approx. 22 amps (300 watts)Quick assembly / disassembly of the fan heater is done with Velcro tape (see picture above), alternatively the base can be screwed. Easy mounting of the fan heater on the adjustable stand (see picture above). The cable can be laid through the interior to the engine compartment, depending on the possibility.Through the connector plug, the fan can be easily removed at any time.The connection is then made directly to the fuse box or the battery (see pictures above).Several switch functions are available for selection:1. switch top = only fan / blower.2. switch down = heating with half fan power3. both switches = heating with full power / full blowerFan heater usage note: The fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from highly flammable materials. Do not block the ventilation flaps.  We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption. If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur. A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-300 watts-12 volts-current consumption: approx. 24-27 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The tailgate net is made of weather-resistant, colorfast nylon. Sturdy brackets on both sides ensure a perfect fit. Only four or six holes are required for mounting. Practical and attractive accessory for pickups, which, unlike the normal tailgate, reduces air resistance and thus improves aerodynamics. Universal fit for many pickups.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.