Front & rear bumpers

Solid 5mm thick, black powder coated license plate holder. The license plate holder is already prewired with two license plate lamps and a rear fog light, all three lights with E-mark, pre-wired. On the license plate holder can be license plates with a dimension of 46 x 11 cm (length x height) can be mounted on the license plate holder. The connection cable has a length of approx. 50 cm, at the end a 3-pin plug and a counterpart for mounting on the vehicle.The license plate holder was specially designed for the rear bumpers we offer. When mounting on other bumpers please check, based on the specified dimensions, whether a mounting is possible.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Super robust, solid black front bumper made of 5 mm thick steel for the Jeep Wrangler JL. The screw-on bracket, with a tube diameter of 48 mm and two welded-on lugs for additional headlights, is included in the scope of delivery, as is the already welded-on cable winch plate. The cable winch plate offers you the possibility of mounting a wide variety of cable winches through the mounting holes already provided. Please refer to the attached sketch for the exact attachment points. The bumper is mounted at the existing fastening points without drilling. The factory-fitted underride guards and parking sensors can no longer be used after installation.This item is supplied without a parts certificate or test report. The installation will invalidate the vehicle's operating permit unless an inspection is carried out immediately in accordance with StVZO §19, Para. 2 in conjunction with §21. After the technical modification has been carried out, the vehicle must therefore be immediately presented to an officially recognised expert at a technical test centre. We ask you to clarify this with your TÜV inspector before purchasing.Suitable for the following vehicle:Manufacturer: FCA (USA)Type: JL (officially still JK)Designation: WranglerKW range: 147-213 and 200 + 65 (PHEV)Year of manufacture: 2018-ETG-NR.: e4*2001/116*0116*26...For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

Black textured, 5mm mild steel, beefy rear bumper with "Black Rock" design. The sturdy rear bumper, with cutout for the spare tire, not only gives your Jeep Wrangler JL an aggressive look, but also provide additional protection. It mounts to the existing mounting points without drilling. The further scope of delivery includes a license plate holder (please note that this is supplied without license plate light & rear fog light) and two solid shackles.German TÜV certificate: Our bumper is delivered with a German TÜV certificate. Thus, the required registration is no longer a problem. Please compare our offer with those of our competitors. With many other offers you only get bumpers without TÜV certificate! The necessary TÜV approval and registration, thus becomes a costly gamble.Suitable for the following vehicle:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG no.: e4*2001/116*0116*as of supplement 26 ...Please note that a rear fog light as well as a license plate light is required for TÜV approval. These parts are not included.We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Black textured mild steel beefy rear bumper in "Black Rock" design. The sturdy, strong tubes, with a Ø 76mm not only give your Jeep Wrangler JL an aggressive look, but also provide additional protection.  The mounting is done on the existing mounting points without drilling.In addition to the rear bumper, you will receive our sturdy license plate holder, which was specially adapted to the bumper. The license plate holder is already pre-wired with two license plate lights and one rear fog light, all three lights with E-mark. License plates with a dimension of 46 x 11 cm (length x height) can be mounted on the license plate holder.TÜV parts certificate: Our bumper is delivered with a TÜV parts certificate. Please compare our offer with those of our competitors. With many other offers you get only bumpers without TÜV certificate! The necessary TÜV approval and registration, thus becomes a costly gamble.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our articles. We will be happy to help you.

Black textured mild steel beefy rear bumper in "Black Rock" design. The sturdy, strong tubes, with a Ø 63,5mm not only give your Jeep Wrangler JL an aggressive look, but also provide additional protection. The trailer hitch already welded to the bumper, can be used with the original American tow hook (is not included). The mounting is done at the existing mounting points without drilling.In addition to the rear bumper, you will receive our sturdy license plate holder, which was specially adapted to the bumper. The license plate holder is already pre-wired with two license plate lights and one rear fog light, all three lights with E-mark. License plates with a dimension of 46 x 11 cm (length x height) can be mounted on the license plate holder.TÜV parts certificate: Our bumper is delivered with a TÜV parts certificate. Please compare our offer with those of our competitors. With many other offers you get only bumpers without TÜV certificate! The necessary TÜV approval and registration, thus becomes a costly gamble.The TÜV parts certificate is valid only for the bumper but not for the welded trailer hitch!

Black textured, mild steel, beefy double tube front bumper in "Black Rock" design. The robust, sturdy tubes,with a Ø 76mm not only give your Jeep Wrangler JL an aggressive look, but also provide additional protection.  The mounting is done on the existing mounting points without drilling. The two tabs already welded to the bumper allow for the installation of auxiliary headlights or a lightbar. The bumper has two receptacles on the front for mounting a license plate holder.This article is supplied without parts certificate or test report. By the assembly the operating license of the vehicle expires if not immediately a, according to StVZO §19, Abs. 2 in connection with §21 prescribed test is accomplished. After the implementation of the technical modification, the vehicle must therefore be immediately presented to an officially recognized expert of a technical testing center. We ask you to clarify this with your TÜV inspector before purchase.

Made of high-strength, extremely robust 8mm thick aluminium, black powder-coated underride guard. Effective protection against stone chips, boulders, etc. Aggressive look and striking off-road look combined in one product. The underride protection can be combined with the original bumper or our accessory bumpers.TÜV parts certificate:Our underride protection is delivered with a TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG No.: e4*2001/116*0116*26 ...Hersteller: Jeep / FCABezeichnung: Gladiator (Pick-up / 4WD)Typ: JTBaujahr: 04/2019-ETG-Nr.: e4*2007/46*1532*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Very robust, massive black 3-part front bumper. 3mm steel bumper for a great look of your vehicle. The bumper can be mounted to original mounting points. The bumper has recesses for the original parking sensors and the original fog lights. Corresponding brackets for lights are included. The included bar can be mounted/demounted easily. In order to achieve more off-road mobility, the bumper corners can be removed without much effort. Tyre sizes up to 37" can be used without any problems, without touching the bumper. The included winch plate allows the use of all common winches with a hole pattern for fastening of : approx. 254 x 114 mm. (For hole dimensions please check out the sketch in the pictures).Registration:This item will be deliverd without a certificate, material certificate or test report. When mounting the bumper the vehicle's type approval expires if not immediately a test, according to StVZO § 19, Abs. 2 in connection with §21 is carried out. After the technical modification. After the technical modification has been carried out, the vehicle must therefore be presented immediately to an officially recognised expert of a technical testing centre. Please check back with your authorities before purchase.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.