Whitewall rings - white - 15 inch - 4 pieces - suitable for steel rims

With our stainless steel rim rings, you not only visually enhance your vehicle, but also give it a classic look. The rim rings come with a sturdy clamp and are simply pressed into the rims. The existing metal rim then sits firmly in the rim flange.These rim rings can be combined with the white wall rings we offer. Please note that the metal rim may scratch the rim paintwork during fitting.We have been offering off-road accessories for 40 years with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Compact electro-pneumatic air horn with strong single tone. The integrated compressor allows the immediate output of the sound by pressing the switch. It does not require a hose. Easy and quick to install.Made in Italy - not a cheap import from the Far East.

Unsere 4" Side Shooter LED Lightbar ist ein leistungsstarker Zusatzscheinwerfer mit ECE R149 Zulassung als Fernscheinwerfer. Durch seine kompakte Bauweise ist der kleine LED Würfel vielseitig einsetzbar.Somit sorgt der Scheinwerfer für mehr Sicherheit auf dunklen, unbeleuchteten Straßen. Auch abseits der Straße im rauen Gelände können unsere Lightbars in Kombination mit unseren Frontbügeln, Überrollbügeln etc. vielseitig eingesetzt werden. Durch den Multivoltanschluss von 9-32 Volt bietet der Scheinwerfer einen weiten Fahrzeugverwendungsbereich für z.B. Off-Road Fahrzeuge, Jeep´s, Pickup´s, US-Cars, LKW´s, SUV´s, AT´s, Traktoren, Bagger, Boote, Motorräder etc. Das druckdichte Alugussgehäuse sorgt für Schutz gegen Wasser, Staub und Schmutz.Durch die jeweils seitlichen 3 LED´s, kann der Side Shooter das Licht bis zu einem Abstrahlwinkel von 180° verteilen.Bitte beachten Sie, dass nur Lightbars/Scheinwerfer die der europäischen ECE-Norm entsprechen im Straßenverkehr zugelassen sind. Alle anderen Scheinwerfer ohne ECE-Kennzeichnung sind nur als Arbeitsscheinwerfer zugelassen und dürfen im Straßenverkehr nicht verwendet werden. Unsere Scheinwerfer haben alle nötigen Prüfzeichen gemäß STVZO und sind 100% eintragungsfrei.Straßenzulassung/Rechtlich Hinweise:STVO Zulassung nahezu weltweit dank E-Prüfzeichen gemäß ECE-Regelung 149 als Fernscheinwerfer & Elektromagnetische Verträglichkeit zertifiziert nach ECE R10.Prüfzeichen: PL = Scheinwerfer mit KunststoffabdeckungPrüfzeichen: E9 = EU-Land, dass die Genehmigung erteilt hat. 9 = SpanienPrüfzeichen: R10 = FunkentstörungGemäß Zulassungsverordnung muss dieser Scheinwerfer paarweise verbaut werden

The spinners bring real racing design to the look of your vehicle - quickly and absolutely individually.The spinners (3-star center caps) are invisibly screwed to the hub cover of the rim. Quickly mounted - cool look. When mounting, make sure that the spinners do not protrude beyond the rim or vehicle width.Dimensions:Height 3cmDiameter 14cmDiameter without wings 8cmScope of delivery:1x Spinner (please buy the desired quantity!)Material spinner: chrome-plated metal / middle cover plastic blackMounting material (screw + nut)Important!The pictured cover plate of the rim is not included but should already be present on your rim.The hub covers are not approved according to StVZO, even if they do not extend beyond the rim.Note on mounting: The spinners are screwed to the hub cap / hub cover. For this purpose, a hole must be drilled in the hub cap. The spinner is then placed on the hub cap and the bolt is passed through and fastened from behind with the nut. Finally, the black cap is placed on top and nothing can be seen of the screw connection.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-Width 140 mm x depth 175 mm x height 110 mm incl. foot.-output temperature fan heater: approx. 50° degrees-Cable length: approx. 2.5 mtr.-Cable with integrated plug fuse 30 A and plug connector for direct connection to the battery-360° rotating base (adjustable in lateral orientation as well as inclination)-heating and separate fan function-Material inside: Polyamide 66 CF20 (high dimensional stability)-Onboard voltage: 12 volts-Nominal power at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)-Peak power at 13.8 volts (running engine or new battery)approx. 22 amps (300 watts)Quick assembly / disassembly of the fan heater is done with Velcro tape (see picture above), alternatively the base can be screwed. Easy mounting of the fan heater on the adjustable stand (see picture above). The cable can be laid through the interior to the engine compartment, depending on the possibility.Through the connector plug, the fan can be easily removed at any time.The connection is then made directly to the fuse box or the battery (see pictures above).Several switch functions are available for selection:1. switch top = only fan / blower.2. switch down = heating with half fan power3. both switches = heating with full power / full blowerFan heater usage note: The fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from highly flammable materials. Do not block the ventilation flaps.  We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

We sell here a vintage ball mirror that will give your vehicle a classic look. Made of high gloss chrome plated metal. The mirror borrows, in design and style, the mirrors used in the past. The mounting was mostly on the fender, to use the mirror as an additional rear view mirror. But mounting on the door was also popular with many car owners. The mirror is universally suitable for the left and right side of the vehicle. Mirror adjustment and locking via the large slotted screw on the back.Dimensions: Diameter: 100 mmLength: 120 mmHeight: 113 mmHole spacing: 50 mmMirror base: 93x27 mmScope of delivery: 1x exterior mirror with clear mirror glass1x mounting material1x rubber washerSuitable for various youngtimers + oldtimers of different manufacturers:AustinAlfa RomeoBMWFerrariFiatFordHillmanJaguarLanciaMaseratiMGMGBMiniMorrisOldsmobilePontiacPorscheRenaultRoverTriumphVWetc.For 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our items. We will be happy to help you.

We sell here a vintage exterior mirror. This mirror, with clamp mount, not only fits perfectly to any old and youngtimer, but also for hot rods and custom cars.The mirror head is made of polished stainless steel and the bracket in chromed metal. The mirrors lean, in design and style, to the formerly used clamp mirrors. They can be mounted, for example, on the door frame, the hood, the roof rails or even on the hinged window. The mirror can thus be used as an additional rear view mirror. The mirror is also an elegant solution to the "blind spot problem" without negatively affecting the appearance of your vehicle. The mirror arm and mirror head are adjustable and can thus be correctly adapted to the respective vehicle. The mirror arm can be screwed around, so that this is suitable for the driver and passenger side. You will receive the mirrors from us including mounting hardware as well as rubber shims to protect the paintwork.Dimensions:Diameter: 100mmMirror arm: 90 ° angledClamp thickness: up to 6mmReversible mirror arm - therefore suitable for driver and passenger sideScope of delivery: 1x exterior mirror1x mounting material2x rubber washersSuitable for various youngtimers + oldtimers of different manufacturers:AustinAlfa RomeoBMWFerrariFiatFordHillmanJaguarLanciaMaseratiMGMGBMiniMorrisOldsmobilePontiacPorscheRenaultRoverTriumphVWetc.For 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our items. We will be happy to help you.

Here we sell a vintage interior mirror that will give your car a classic look.Mirror head and arm are made of polished / chromed metal and the base is made of plastic. The mirror leans, in design and style, to the mirrors used mirrors used in the past. It is mounted on the windshield. The metal bracket is glued there and the mirror is attached to it.The large mirror surface, in combination with the swiveling ball head, ensures a perfect view to the rear. In addition, the Mirror has a lever for dimming.Dimensions:Mirror head dimensions: approx. 248x55mm.All other dimensions can be seen in the dimensioned photos in the gallery images.Scope of delivery:1x interior mirrorFor various Youngtimer + Oldtimer of different manufacturers suitably:AustinAlfa RomeoBMWFerrariFiatFordHillmanJaguarLanciaMaseratiMGMGBMiniMorrisOldsmobilePontiacPorscheRenaultRover TriumphVWetc.For 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our items. We will be happy to help you.