LED daytime running lights with dimming function 90 mm suitable for various Ford models

No cheap import from the Far East - but Made in Europe!Newly developed compressor single horn. Bright chrome plated super long funnel, deep sound and all with a compressor.No cheap import from the Far East - but Made in Europe!

Notice! Our spotlights are not to be compared with cheap headlights from the Far East, which are also offered in large quantities! Only if a headlight has an E-mark, this is also approved in road traffic. Please always clarify this in advance. All headlights offered by us have this test mark and are therefore approved! When using non-approved headlights, the vehicles or the headlights will be shut down at the next inspection of the police or Dekra or TÜV!1 pc. Driving lamp with position lamp (Please buy the desired quantity!)Robust driving lamp with powerful light energy for highest demands. The stainless steel housing guarantees durability. The ideal auxiliary headlight for truckers, off-road, motorhomes, vans, etc. With E-mark and therefore approved for road traffic! Housing, stone guard and brackets are made of polished, stainless steel. Full light power with additional position light.Important! We supply high quality material here. The housing is made of stainless steel and therefore very easy to clean. Others offer only chrome housings, which already form the first rust after several weeks. Compare us with other suppliers! Maybe we are not always the cheapest supplier but you get high quality goods from us!For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We are happy to help you.

12" LED light bar/headlamp with 20 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail:Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually do not perform more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:-Width 140 mm x depth 175 mm x height 110 mm incl. foot.-output temperature fan heater: approx. 50° degrees-Cable length: approx. 2.5 mtr.-Cable with integrated plug fuse 30 A and plug connector for direct connection to the battery-360° rotating base (adjustable in lateral orientation as well as inclination)-heating and separate fan function-Material inside: Polyamide 66 CF20 (high dimensional stability)-Onboard voltage: 12 volts-Nominal power at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)-Peak power at 13.8 volts (running engine or new battery)approx. 22 amps (300 watts)Quick assembly / disassembly of the fan heater is done with Velcro tape (see picture above), alternatively the base can be screwed. Easy mounting of the fan heater on the adjustable stand (see picture above). The cable can be laid through the interior to the engine compartment, depending on the possibility.Through the connector plug, the fan can be easily removed at any time.The connection is then made directly to the fuse box or the battery (see pictures above).Several switch functions are available for selection:1. switch top = only fan / blower.2. switch down = heating with half fan power3. both switches = heating with full power / full blowerFan heater usage note: The fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from highly flammable materials. Do not block the ventilation flaps.  We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.