Illuminated LED roof aerial for cars, motorbikes, etc.

Ceramic fan heater, ideal for cars, off-road vehicles, vans, campers, buses and trucks with 12 volt on-board voltage. This is individually adjustable in the inclination, it can be decided on the basis of 2 switching levels between heating and cooling. Through the rotary switch, the fan can be regulated in different stages.The connection is only possible directly to the battery.NO connection via the cigarette lighter!Please be sure to compare our product with the fan heaters from other suppliers!At first glance, these look similar - but they are not! The price difference is made by the following important detail: Our 400 Watt fan heater must be connected directly to the battery or the fuse box. This is the only way to ensure the required power consumption.If connected via the cigarette lighter, the power cables of the cigarette lighter would become too hot and major damage, including fire, could occur.A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter, usually perform no more than between 80 - 120 watts. This is just enough to generate a "warm breeze".Please compare first and then buy!Details:- 400 watts-12 volts-current consumption: approx. 26-30 amp-Width 185 x depth 115 x height 140mm-output temperature fan heater: 50° degrees-Cable length: approx. 3m-Cable with integrated fuse 30A and ring tongue plug for connection to batteryThe fan heater should always be operated in a dry and heat-resistant location, only under supervision and away from children's hands. Care should be taken to keep the fan heater away from easily flammable materials. Do not block the ventilation flaps. We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Recovery belt "PROFIOur top product, high-quality heavy-duty recovery belt e.g. for use on the winch or directly on the vehicle. Two-layer, durable synthetic fibre fabric. The green end loops are additionally reinforced.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Approval regulations:Thanks to ECE, E11, R87 and RL identification / test mark 100% in Europe-wide road traffic approval and registration-free.Thanks to the approval mark on the lens of the daytime running light, no documents (such as test reports, ABE etc.) need to be carried along with the vehicle documents.Only lights like these, with the ECE-87 and RL markings on the lens, are approved for road use as daytime running lights, everything else is ONLY a marker light!Installation:This universal LED daytime running light & fog light installation set replaces the factory-fitted fog lights. They are fitted to the existing mounting points on the bumper. Simply replace the fog lights with the daytime running lights (with the installation material) and reconnect the cables according to the connection instructions.If your vehicle does not have original fog lights, you will not only need a corresponding cover with a cut-out at the front for the fog lights, but also the on/off switch for the fog lights. You can also find this set here in our shop.Connection:The daytime running lights are supplied with an H11 plug (the illustration above shows an HB4 plug). This plug is suitable for some vehicles (e.g. VW, Audi, Seat, etc....). If this is not suitable for your model, our H11 plug must be replaced by a vehicle-specific plug. Unfortunately, we do not offer this. You also have the option of disconnecting the plugs and connecting the cables.The control unit included in the scope of delivery regulates the switching of the lights.  The daytime running lights light up automatically when the ignition is switched on and the vehicle lights are switched off. They are not a substitute for dipped headlights at dusk or in the dark. The daytime running lights switch off automatically when the vehicle lights or fog lights are switched on. On vehicles with xenon headlights, the headlight plus must be connected from the daytime running lights to the parking lights!Vehicles with Can-Bus systemToday's newer generation vehicles are equipped with so-called Can-Bus or LIN-Bus systems, which test the light, display and indicator functions using a low, continuous test current. To ensure that no error message is displayed after the installation of our daytime running lights + fog lights and the omission of the standard fog lights, we can supply a load resistor together with the lights, which is connected to the connection cables of the fog lights. This allows you to fit the set to your vehicle without any faults. Please inform us after your purchase if your vehicle is equipped with a CanBus system.We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.