Eibach Bilstein +30mm Suspension fits Jeep Wrangler JL 4xe (2021-)

€995.00*

Available, delivery time: 2 - 3 days » Different abroad

Product number: 8085
Product weight: 36 kg
Item shipping: Standard shipping
  • Fits Jeep Wrangler JL 4xe Hybrid (2021-)
  • 2x Eibach coil springs +30mm front axle
  • 2x Eibach coil springs +30mm rear axle
  • 2x Bilstein shock absorber B8 front axle
  • 2x Bilstein shock absorber B8 rear axle
  • 1x TÜV parts certificate
Eibach Bilstein +30mm Suspension fits Jeep Wrangler JL 4xe (2021-)

To add the finishing touches to the look and performance of your vehicle, we have developed this 30mm lift kit with the specialists from Eibach & Bilstein.  The suspension springs on offer were developed by Eibach in Germany, adapted to European road conditions and produced exclusively for Hansen Styling Parts.

Please note that the springs offered are a German quality product and cannot be compared with suspensions from the USA.  Suspensions from the USA are mostly not tested according to EU regulations, i.e. they are also offered without a TÜV parts certificate. The installation of these suspensions will invalidate the operating licence of your vehicle! TÜV parts certificate: The suspension springs are delivered with a TÜV parts certificate. This means that the necessary registration is no longer a problem.

This Bilstein B8 shock absorber was developed especially for Hansen Styling Parts. The shock absorber with the dimensions of the Bilstein B6 shock absorber and the identification of the Bilstein B8 shock absorber is the ideal complement to our 30mm Eibach height-adjustment springs.

Bilstein B8 gas shock absorbers significantly improve handling and increase ride comfort. Whether on-road or off-road, the BILSTEIN B8 Off-Road guarantees balanced driving behaviour, perfect handling and absolute vehicle control in every driving situation.

The BILSTEIN B8 Off-Road, equipped with the special BILSTEIN monotube gas pressure technology, degressive rebound damping and tightly tuned compression damping, prevents uncontrolled vibrations of the body or axles. The steering gains precision and the load-bearing capacity of the chassis is substantially higher with high payloads, drawbar loads or fast off-road driving.

Vehicle type:

  • Vehicle manufacturer: Jeep /FCA
  • Trade name: Wrangler Unlimited PHEV (Sahara / Rubicon) / Series: JL
  • Year of manufacture: 2021-
  • vehicle type : JK
  • EG-BE-No.: e4*2001/116*0116*.. as of NT 38
  • only for vehicles with hybrid drivePHEV (plug-in-hybrid)

For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

Technical details

• permissible axle loads VA: max. 1410kg
• permissible axle loads HA: max. 1615kg
• Not for vehicles with levelling system
• not for vehicles with air suspension
• only for vehicles with all wheel drive (AWD / 4WD)
• only for vehicles with hybrid drive PHEV (plug-in-hybrid)

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Matching items

Black textured Rock Rails suitable for Jeep Wrangler JL 4-Door (2018-)
The black powder-coated, textured, high-strength aluminium Rockrails in the unmistakable Black Rock design not only give your Jeep an aggressive look, but also provide additional protection and are helpful for easier entry, exit and loading of your car roof. Fitted to existing fixing points without drilling, the mounting brackets are already welded to the running boards.TÜV parts certificate:Our Rock Rails are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FCA (I)Trade name: Jeep WranglerVehicle type: JK (Family JL)With EC-BE-No.: e4*2001/116*0116*.. as of Supplement 26For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

€610.00*
Complete wheels W-TEC Extreme 8,5x17 "Black Edition" with 285/70R17 Cooper Discoverer ST fits for Jeep Wrangler JL (2018-)
The black "W-TEC EXTREME", which we have elaborately manufactured, exclusively adopts the striking appearance of the beadlock rim. The rims are mounted with the original wheel nuts.We can offer you all tyre sizes listed in the TÜV parts certificate as complete wheels. Depending on the tyre size, there are different manufacturers and designs of the respective tyres. IMPORTANT:The conditions/of the TÜV parts certificate must be observed. Especially with tyre sizes from 295/70R17 onwards, please note that these may only be used in conjunction with, e.g. our height-lifting springs. You can call up the certificate at the bottom of this page under "Instructions for use".Delivery time: The complete wheels are made especially for you after receipt of payment, therefore the delivery time is approx. 14 days after receipt of payment. The delivery will be made by a forwarding agent. You will receive a call from the freight forwarder and can then arrange a delivery date.Rim description:One-piece light alloy wheelSize: 8,5x17 ET+30Bolt circle: 5x127Centre hole: 71,5mmWheel load: 900kgVehicle type:Suitable for the following vehicle:Manufacturer: FCA (USA)Type: JL (officially still JK)Designation: WranglerKW range: 147-213 and 200 + 65 (PHEV)Year of manufacture: 2018-ETG-NR.: e4*2001/116*0116*26...For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

€2,904.00*
Black steel frontbumper suitable for Jeep Wrangler JL (2018-)
Very robust, massive black 3-part front bumper. 3mm steel bumper for a great look of your vehicle. The bumper can be mounted to original mounting points. The bumper has recesses for the original parking sensors and the original fog lights. Corresponding brackets for lights are included. The included bar can be mounted/demounted easily. In order to achieve more off-road mobility, the bumper corners can be removed without much effort. Tyre sizes up to 37" can be used without any problems, without touching the bumper. The included winch plate allows the use of all common winches with a hole pattern for fastening of : approx. 254 x 114 mm. (For hole dimensions please check out the sketch in the pictures).Registration:This item will be deliverd without a certificate, material certificate or test report. When mounting the bumper the vehicle's type approval expires if not immediately a test, according to StVZO § 19, Abs. 2 in connection with §21 is carried out. After the technical modification. After the technical modification has been carried out, the vehicle must therefore be presented immediately to an officially recognised expert of a technical testing centre. Please check back with your authorities before purchase.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

€1,842.00*
Stainless steel tire cover suitable for Jeep Wrangler JL (2018-) standard tires
Highly polished stainless steel tire cover complete with stainless steel ring and black plastic center plate. The stainless steel ring is lockable. The cover plate was made specifically for the Jeep Wrangler JL. The rear view camera integrated in the reseverad can be used without any problems. The smooth surface of the center plate can be easily painted or pasted with foil.Excellent as an advertising medium. The high quality durability and good cleanability are further features of this convincing product.Please note, however, that the tire cover is always designed only for normal road tires, should you drive a rim with e.g. coarse tread (all-terrain), then please measure your tire before again. The scope of our tire cover can be found below in the description under details.The tire cover is not suitable for the Jeep Wrangler JL Sport with 245/75R17!Details of the tire cover:Ring circumference: 254cmRing width: 24,5cmdiameter cover plate: 78,5cmSuitable for the following vehicle:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG-No.: e4*2001/116*0116*as of supplement 26 ...with the respective standard tires of 255/75R17 or 255/70R18.For 40 years we offer off road accessories with service and headquarter in Germany. Ask us to learn more about our items. We will be happy to help you.

€357.00*