Bestop TrekTop NX black 56862-35 suitable for Jeep Wrangler JL (2018-) 2 door

One of the first and most fundamental modifications to the Jeep Wrangler is always a suspension lift. Groud clearance, driving comfort, safety and other modifications such as tyres, bumpers, roof rack, etc. are always made in coordination with the suspension. This is the only way to achieve the maximum driving experience.1. Eibach suspension lift springs 50-60mmTo give the look and performance of your vehicle the final touch, the Eibach Pro-Lift-Kit was developed. The offered lift springs were developed in cooperation with the suspension specialists of Eibach in Germany, adapted to the European road conditions and produced exclusively for Hansen Styling Parts. The springs were developed on a JL with mounted steel bumpers, winch, etc. and achieve a lifting of approx. 50mm. In series conditon, a lift of up to 60mm is possible.2. Bilstein B8 high-performance shock absorberDue to its extended design, the BILSTEIN B8 5100 fits perfectly with our Eibach lift springs for your Jeep Wrangler JL. The BILSTEIN monotube technology and the patented degressive vave system of the BILSTEIN B8 5100 are specially designed for these requirements. Whether on or off the road, it responds to changing road conditions without delay, providing directional stability, vehicle control and ride comfort.3. Coupling rods/stabilisersThe longer coupling rods, for the front and rear axles, keep the movement of the axle, e.g. in case of entanglement, within reasonable limits and improve driving stability considerably.4. Axle stops/Bump stopsThe axle stops, also known as bump stops, are installed within the spring travel and prevent the shock absorbers from botooming or bouncing when the wheels are submerged to the maximum extent in the wheel housing.5. Adjustable panhard bar - front axleThe reinforced adjustable panhard rod, for 2-6" lift kits, is mandatory. It ensures proper axle centering after the modification.6. Panhard bar bracket - rear axleThe panhard bar offset bracket is mounted to ensure perfect axle centering on lifted vehicles.7. Brake lineThe brake line must, normally, only be extended from approx. 3" lift on the Jeep Wrangler JL. The original brake line bracket has to be removed with our suspension lift.8. Trailing arm / Geo correction bracket (not included in the scope of delivery here)Geometric correction brackets or trailing arm lowering is always useful if the caster, i.e. the angle at which the tyres are behind the vertical axis of rotation, is reduced due to the installed suspension lift. Among other things, this can cause the well-known death wobble. The geobrackets correct the angle back to the correct setting and improve th driving characteristics.We offer this complete chassis in our store also with the Geometric Correction Brackets!TÜV-certificateOThe delivery includes a TÜV certificate. You'll receive a suspension system that has been tested according to the current guidelines for pedestrian protection (2009/102/EWG) and is TÜV approved.The difference to other suspension systems:The springs and shock absorbers were manufactured and developed in cooperation with the suspension specialists from Eibach and Bilstein in Germany and adapted to European road conditions. The precise tuning of Eibach suspension springs and Bilstein shock absorbersreduces the uncontrolled movement of the Jeep Wrangler's high body. The approved BILSTEIN upside-down-technology ensures that the support and lateral forces are distributed over a large area and there is a significant increase in torsional rigidity in the connection between the wheel and the body. This significantly improves ride comfort on the road. The steering precision and the robustness of the vehicle are increased. This guarantees more vehicle control, safer handling as well as better traction.Vehicle:Car manufacturer: Jeep /FCATrade name: Wrangler Unlimited / Series: JLCar type: JK (only for 4-door)Year of construction: 11/2017-2020EG-BE-Nr.: e4*2001/116*0116*.. from supplement 26Technical information:Permissible axle load: max. 1406kgTechnically possible axle load: max. 1501kgNot for vehicles with level controlNot for vehicles with the trade name Wrangler with short wheel base - model 2-door & Hybrid model 4xe and Gladiator JT.​Warranty:Installation must be proven to have been carried out by a specialist garage or suitably qualified person. No liability is accepted for damages to the vehicle caused, e.g. by incomplete installation of all components or incorrect installation.

The robustly manufactured bonnet locks secure the engine compartment against unauthorised access.In addition, the bonnet is secured by the locks and cannot open by itself. The locks can be fitted without drilling.Suitable for the following vehicle:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG no.: e4*2001/116*0116*as of supplement 26 ...For 40 years, we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To add the finishing touches to the look and performance of your vehicle, we have developed this 30mm lift kit with the specialists from Eibach & Bilstein.  The suspension springs on offer were developed by Eibach in Germany, adapted to European road conditions and produced exclusively for Hansen Styling Parts.Please note that the springs offered are a German quality product and cannot be compared with suspensions from the USA.  Suspensions from the USA are mostly not tested according to EU regulations, i.e. they are also offered without a TÜV parts certificate. The installation of these suspensions will invalidate the operating licence of your vehicle! TÜV parts certificate: The suspension springs are delivered with a TÜV parts certificate. This means that the necessary registration is no longer a problem.This Bilstein B8 shock absorber was developed especially for Hansen Styling Parts. The shock absorber with the dimensions of the Bilstein B6 shock absorber and the identification of the Bilstein B8 shock absorber is the ideal complement to our 30mm Eibach height-adjustment springs.Bilstein B8 gas shock absorbers significantly improve handling and increase ride comfort. Whether on-road or off-road, the BILSTEIN B8 Off-Road guarantees balanced driving behaviour, perfect handling and absolute vehicle control in every driving situation.The BILSTEIN B8 Off-Road, equipped with the special BILSTEIN monotube gas pressure technology, degressive rebound damping and tightly tuned compression damping, prevents uncontrolled vibrations of the body or axles. The steering gains precision and the load-bearing capacity of the chassis is substantially higher with high payloads, drawbar loads or fast off-road driving.Vehicle type:Vehicle manufacturer: Jeep /FCATrade name: Wrangler Unlimited / Series: JLYear of manufacture: 11/2017-2020vehicle type : JKEG-BE-No.: e4*2001/116*0116*.. as of NT 26Suitable only for the 4-door modelNot suitable for the 2-door model, 4xe or GladiatorFor 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.