1x Alloy wheel W-TEC All Terrain 8,5x18 ET35 fit for Jeep Wrangler JL (2018-) + 4xe

Very robust, massive black 3-part front bumper. 3mm steel bumper for a great look of your vehicle. The bumper can be mounted to original mounting points. The bumper has recesses for the original parking sensors and the original fog lights. Corresponding brackets for lights are included. The included bar can be mounted/demounted easily. In order to achieve more off-road mobility, the bumper corners can be removed without much effort. Tyre sizes up to 37" can be used without any problems, without touching the bumper. The included winch plate allows the use of all common winches with a hole pattern for fastening of : approx. 254 x 114 mm. (For hole dimensions please check out the sketch in the pictures).Registration:This item will be deliverd without a certificate, material certificate or test report. When mounting the bumper the vehicle's type approval expires if not immediately a test, according to StVZO § 19, Abs. 2 in connection with §21 is carried out. After the technical modification. After the technical modification has been carried out, the vehicle must therefore be presented immediately to an officially recognised expert of a technical testing centre. Please check back with your authorities before purchase.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Made of high-strength, extremely robust 8mm thick aluminium, black powder-coated underride guard. Effective protection against stone chips, boulders, etc. Aggressive look and striking off-road look combined in one product. The underride protection can be combined with the original bumper or our accessory bumpers.TÜV parts certificate:Our underride protection is delivered with a TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG No.: e4*2001/116*0116*26 ...Hersteller: Jeep / FCABezeichnung: Gladiator (Pick-up / 4WD)Typ: JTBaujahr: 04/2019-ETG-Nr.: e4*2007/46*1532*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Scope of delivery:4 pieces (2x length 1010mm and 2x length 840mm)1x special gel adhesive for additional fastening25mm (the vehicle is widened by 25mm per fender / 50mm per axle)TÜV Süd test report (TÜV-Süd, Westendstr. 199, 80686 Munich, test report 16-00074-CP-BWG)TÜV registration:You will receive a TÜV Süd test report from us with the delivery of the extensions. The entry of the fender flares is not necessary, this is also in the report, but we know from experience and from many customer messages that the law enforcement officers like to see such a TÜV confirmation again. Only then will there really be no trouble with the inspection service and that's why we had a TÜV Süd report drawn up.Suitable for the following vehicle:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG no.: e4*2001/116*0116*as of supplement 26 ...Assembly:the ambient temperature and the temperature of the components or mounting surface must be a minimum of 20 ° Celsius during assembly and at least 24 hours afterwardsthe surfaces on the vehicle for assembly must be rust-free, smooth, thoroughly cleaned and free of greaseAfter removing the carrier film, the widening must be pressed against the surface for approx. 1 minute with high and even pressurethe ends of the fender flares can be adapted to the vehicle look with a sharp carpet knifewe recommend that you leave the vehicle for at least 6 hours after installationthe final strength of the glued areas is only reached after 48 hoursplease do not wash the vehicle for at least 48 hoursFor some widths, some mounting situations, structured surfaces or if the installation instructions cannot be followed, additional fastening with e.g. Self-tapping screws or body adhesive requiredFor 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Universal year-round use and flexible in all weather conditionsCompletely replaces the two front hardtop panelsEasy installation due to factory holesNo drilling required on the hardtop or bodyworkUncomplicated opening with the front latches at the top of the window frameThe folding frame is simply folded back after unlockingBlack powder coat finish on hardware and linkage provides durability and enhances interior appearanceThe Sunrider is delivered pre-assembled and ready for installationSuitable for the following vehicle:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG no.: e4*2001/116*0116*as of supplement 26 ...Bestop is the world's largest soft top manufacturer. This is an original equipment manufacturer on many vehicles, such as Chrysler Jeep, Suzuki and supplies the convertible tops directly to these companies. This means you get a top that is perfectly matched to your vehicle. No fit or quality problems!We have been offering off road accessories for 40 years with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.